Pharmaceutical Technology IV
Keywords |
Classification |
Keyword |
OFICIAL |
Technological Sciences |
Instance: 2019/2020 - 1S
Cycles of Study/Courses
Acronym |
No. of Students |
Study Plan |
Curricular Years |
Credits UCN |
Credits ECTS |
Contact hours |
Total Time |
MICF |
152 |
Official Curriculum |
4 |
- |
6 |
52 |
162 |
Teaching language
Portuguese
Objectives
To apply the knowledges that the student aquired during propedeutic lectures and in Tecnologia Farmacêutica I, Tecnologia Farmacêutica II and Tecnologia Farmacêutica III.
The student must study for 162 hours (6 ECTS x 27 hours), from which 26 correspond to theoretical lectures and 20 to laboratorial practices. From the other 116 hours, from 9 to 10 correspond to evaluation and the other 106 to 107 to study hours.
Besides Tecnologia Farmacêutica, the student must be aware of the following subjects: Surface phenomena and Macromolecules and colloids (from Applied Physics) and Coligative properties of solutions (from General and Inorganic Chemistry).
Learning outcomes and competences
To konw how to formulate and prepare, from the magistral or industrial points of view:
1 - ophtalmic, nasal and parenteric dosage forms,
2 - modified release dosage forms.
Working method
Presencial
Pre-requirements (prior knowledge) and co-requirements (common knowledge)
The students should have obtained frequency, with success, of the courses on Tecnologia Farmacêutica I, Tecnologia Farmacêutica II and Tecnologia Farmacêutica III.
Program
THEORETICAL CLASSES
1. Pharmaceutical preparations that require special manufacturing cares. Requirements: sterility; isotony; pH; apyrogeny; particle size.
1.1. Sterility. Sterilization: methods, criteria of use.
1.2. Isotony. Isotonization: concept, fundamentals. Tonicity adjustment.
1.3.pH
1.4. Apirogeny. Pyrogens. Types, origin, control.
1.5. Particle size.
2. Ophtalmic preparations.
2.1. Formulation: excipients and preparation techniques.
2.2. Control of ophtalmic preparations.
2.3. The monograph Ophtalmic preparations from the Portuguese Pharmacopoeia.
3. Nasal preparations.
3.1. Formulation: excipients and preparation techniques.
3.2. Control of nasal preparations.
3.3. The monograph Nasal preparations from the Portuguese Pharmacopoeia.
4. Parenteral preparations.
4.1. Formulation: excipients and preparation techniques.
4.2. Packaging: glass and plastic.
4.3. Control of parenteral preparations.
4.4. The monograph Parenteral preparations from the Portuguese Pharmacopoeia.
5. Modified release dosage forms.
5.1. Introduction. Terminology; dosage forms and availability; preparation (immediate dose and maintainance dose); physiological, physico-chemical and galenic methods.
5.2. Biotechnology. Definition. Application.
5.3. Biopharmaceutical products (Proteins, peptides, nucleic acids).
5.4. Routes of administration of biopharmaceutical products.
5.4.1. Parenteral route.
5.4.2. Oral route.
5.4.3. Buccal use.
5.4.4. Pulmonary route.
5.4.5. Nasal use.
5.4.6. Transdermal use.
5.4.7. Occular use.
5.5. Controlled release systems for biopharmaceutical products.
5.5.1. Lipossomes.
5.5.2. Lipidic nanoparticles (SLN and NLC).
5.5.3. Polymeric nanoparticles.
5.5.4. Micelles.
5.5.5. Micro and nanoemulsions.
5.5.6. Other systems.
6. Stability of medicines.
6.1. Drug produts instability.
6.2. Shelf-life.
7. Industrial pharmacy.
7.1. Introduction: the concept of Quality.
7.2. Industrial pharmacy organization: departments and/or sections; functions and connections. Organigram:flow of materials.
7.3. Good Manufacturing Practices; validations.
LABORATORY CLASSES
1.Explication of laboratory work
2.Colyrium of zinc sulphate
3. Injectable solution of aminophylline
4. Injectable solution of ascorbic acid
5. Isotonic solution of glucose
6. Injectable solution of B complex
7. Extemporaneous injectable of benzathine penicillin
8.Development of modified release tablets of thiamine hydrochloride
BIBLIOGRAPHY
1-Tecnologia Farmacêutica - L.Nogueira Prista, A. Correia Alves, R. Morgado, J.M.Sousa Lobo - 1º volume, 8ª edição, 2º volume, 7ª edição, 3º volume, 8ª edição, Fundação Calouste Gulbenkian, Lisboa, 2012-2013.
2-Crommelin, D.J., Sindelar, R.D., Meibohm, B., Pharmaceutical Biotechnology: Fundamentals and Apllications, Springer Science and Business Media, 2013.
3-Gad, S.C., Handbook of Pharmaceutical Biotechnology,, volume 2, John Wiley and Sons, 2007.
4-Mota, M., Biotecnologia: Fundamentos e Aplicações. Edições Lidel, 2003.
5-Walsh, G., Pharmaceutical Biotechnology: Concepts and Applications, John Wiley and Sons, 2007.
6-J.L.Vila Jato, Tecnologia Farmaceutica - 2º volume. Editorial Sintesis, Madrid, 1996.
Mandatory literature
Prista L. Nogueira;
Tecnologia farmacêutica. ISBN: 978-972-31-0975-7
Crommelin Daan J. A. 340;
Pharmaceutical biotechnology. ISBN: 978-1-4200-4437-9
Vila Jato José Luis 340;
Tecnología farmacéutica. ISBN: 84-7738-539-4
Vila Jato José Luis 340;
Tecnología farmacéutica
Gad, S.C.; Handbook of Pharmaceutical Biotechnology
Mota, M.; Biotecnologia: Fundamentos e Aplicações
Walsh, G.; Pharmaceutical Biotechnology: Concepts and Applications
Teaching methods and learning activities
Theoretical and laboratorial classes.
Software
Não aplicável
keywords
Health sciences > Pharmacological sciences > Pharmacy
Technological sciences > Technology > Nanotechonology
Evaluation Type
Distributed evaluation with final exam
Assessment Components
designation |
Weight (%) |
Exame |
65,00 |
Prova oral |
15,00 |
Trabalho laboratorial |
20,00 |
Total: |
100,00 |
Amount of time allocated to each course unit
designation |
Time (hours) |
Estudo autónomo |
116,00 |
Frequência das aulas |
46,00 |
Total: |
162,00 |
Eligibility for exams
Estimated number of theoretical classes per student - 26
Estimated number of laboratory classes per student - 10
To obtain attendance, the student must participate in at least 3/4 of the expected number of laboratory classes (maximum number of missing classes = 3). In addition, it should have corresponded to the laboratory assessment set out below.
1-LABORATORY EVALUATION
Components of the distributed laboratory evaluation:
a) Evaluation during laboratory classes on ophthalmic preparations, parenteral preparations and modified release tablets.
During each of these classes, questions will be asked to the members of each group about the fundamentals of the work to be done.
At the end of each class, each group must submit the PREPARATION FORM of each of the works carried out, well presented and with sufficient information to make the lot traceable.
b) Carry out a work drawn from among the work done in the laboratory classes.
Each student will be assigned a classification for the work done. To be approved in the laboratory evaluation, students will have to obtain in this component a classification equal or superior to 9.5 values.
Students not approved in the laboratory evaluation will not be able to take the theoretical exam.
Students who do not have approval in the laboratory component, will only be able to have a second opportunity of laboratory evaluation in the period of normal of exams.
2- THEORETICAL EVALUATION
The final written exam will be held on the date set by the Pedagogical Council during the examination period.
Students who have a grade of 9.5 or higher are approved. Students who score less than 9.5 are not approved.
Calculation formula of final grade
EVALUATION METHOD
The evaluation method of the course follows the Evaluation Rules for the 2018/2019 academic year approved by the Pedagogical Council.
The calculation of the final classification follows the templates set out in "Frequency acquisition".
Distributed laboratory evaluation
The final laboratory classification results from the weighted average of the components of the laboratory assessment a) (questions) and b) (work drawn) corresponding respectively to 15% and 20% of the total value of the final classification.
The students that in the distributed laboratory evaluation have a classification inferior to 9,5 values will be able to carry out laboratory exam in the period of normal exams.
Theoretical evaluation
The final theoretical exam is constituted by a written test that focuses on all the material taught in theoretical classes. This examination will take place on the dates set by the Pedagogical Council for the period of exams.
Students will be required to have a classification higher or equal to 9.5 values on the theoretical exam to pass.
Final classification
Relative weight of the laboratory evaluation in the final classification - 35%
Relative weight of theoretical assessment in the final classification - 65%
Grade improvement
If the student wishes to improve the grade, he/she must take the final written exam at the time of appeal, abdicating the classification obtained in the two frequencies.
If the student wish, he/she can also improve the laboratory evaluation (abdicating the classification obtained in the distributed laboratory evaluation), and must notify the responsible teachers. In this case, the final grade is the weighted average of the scores obtained in these two new tests.
Examinations or Special Assignments
Not applicable.
Internship work/project
Não aplicável.
Special assessment (TE, DA, ...)
As established by the "Normas de avaliação" for 2018/2019.
Classification improvement
As established by the "Normas de avaliação" for 2018/2019.