The energy approach to fatigue crack growth of S355 steel welded specimens subjected to bending

• Tipo: Artigo em Revista Científica Internacional
• Data: 2022

Autores

Rozumek, D (Autor) Outra; Lewandowski, J (Autor) Outra; Lesiuk, G (Autor) Outra; Marciniak, Z (Autor) Outra; Correia, JA (Autor) FEUP; Macek, W (Autor) Outra

Revista

Título: Theoretical and Applied Fracture Mechanics

Vol. 121

ISSN: 0167-8442

Editora: Elsevier

Indexação

ISI Web of Knowledge - 0 Citações

Scopus - 1 Citação

Outras Informações

ID Authenticus: P-00W-VVH

DOI: 10.1016/j.tafmec.2022.103470

Abstract (EN): The study presents the results of the research on the rate of fatigue crack growth subjected to bending in the ferritic-pearlitic structure. The studies were carried out at a constant amplitude of the moment and at various values of the load ratios R and at the operating frequency of the machine of 28.4 Hz. Flat specimens made of S355 steel and with fillet welds and with double-sided blunt external notches as well as concave and convex welds were tested. The tests were performed on specimens without and after relief annealing. The study showed that the heat treatment had an influence on the dispersion of the test results described by the energy parameter. It was also observed that the effect of the applied treatment increased the rate of fatigue crack growth.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 9