Saltar para:
Logótipo
Você está em: Início > Publicações > Visualização > Efficiency of a gearbox lubricated with wind turbine gear oils
Mapa das Instalações
FC6 - Departamento de Ciência de Computadores FC5 - Edifício Central FC4 - Departamento de Biologia FC3 - Departamento de Física e Astronomia e Departamento GAOT FC2 - Departamento de Química e Bioquímica FC1 - Departamento de Matemática

Efficiency of a gearbox lubricated with wind turbine gear oils

Título
Efficiency of a gearbox lubricated with wind turbine gear oils
Tipo
Artigo em Revista Científica Internacional
Ano
2014
Autores
Pedro M T Marques
(Autor)
Outra
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
Ramiro C Martins
(Autor)
FEUP
Jorge H O Seabra
(Autor)
FEUP
Revista
Vol. 71
Páginas: 7-16
ISSN: 0301-679X
Editora: Elsevier
Classificação Científica
FOS: Ciências da engenharia e tecnologias > Engenharia mecânica
CORDIS: Ciências Tecnológicas > Engenharia > Engenharia mecânica
Outras Informações
ID Authenticus: P-008-HD8
Resumo (PT): In this study a two stage multiplying gearbox with helical gears and four fully formulated wind turbine gear oils were tested, on a back-to-back gearbox test rig with recirculating power, at low input speeds (100–500 rpm) and high input torques (500–1000 Nm). The gearbox oil sump temperature was set free. A numeric power loss model simulating all the relevant power loss mechanisms was implemented, aiming to evaluate the relative influence of each power loss component. The experimental results have shown that each wind turbine gear oil formulation generated different power loss resulting in distinct stabilized operating temperatures.
Abstract (EN): In this study a two stage multiplying gearbox with helical gears and four fully formulated wind turbine gear oils were tested, on a back-to-back gearbox test rig with recirculating power, at low input speeds (100-500 rpm) and high input torques (500-1000 Nm). The gearbox oil sump temperature was set free. A numeric power loss model simulating all the relevant power loss mechanisms was implemented, aiming to evaluate the relative influence of each power loss component. The experimental results have shown that each wind turbine gear oil formulation generated different power loss resulting in distinct stabilized operating temperatures.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Contacto: pmarques@inegi.up.pt
Nº de páginas: 10
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Dos mesmos autores

Influence of gear loss factor on the power loss prediction (2015)
Artigo em Revista Científica Internacional
Carlos M C G Fernandes; Marques, PMT; Ramiro Martins; Jorge Seabra
Gearbox power loss. Part III: Application to a parallel axis and a planetary gearbox (2015)
Artigo em Revista Científica Internacional
Carlos Fernandes; Pedro Marques; Ramiro Martins; Jorge Seabra
Gearbox power loss. Part II: Friction losses in gears (2015)
Artigo em Revista Científica Internacional
Carlos Fernandes; Pedro Marques; Ramiro Martins; Jorge Seabra
Gearbox power loss. Part I: Losses in rolling bearings (2015)
Artigo em Revista Científica Internacional
Fernandes, CMCG; Marques, PMT; Martins, RC; Seabra, JHO; Jorge Seabra
Film thickness and traction curves of wind turbine gear oils (2015)
Artigo em Revista Científica Internacional
Pedro M T Marques; Ramiro C Martins; Jorge H O Seabra; Carlos M C G Fernandes

Das mesmas áreas científicas

The influence of migrated materials on Tool wear ratio (2002)
Tese
José Duarte Ribeiro Marafona; Sem Nome; Catherine Wykes
Análise Dinâmica de Estruturas de Veículos (1985)
Tese
José António dos Santos Almacinha; Lúcia Maria Dinis

Ver todas (486)

Da mesma revista

Two phosphonium cation-based ionic liquids used as lubricant additive. Part II: Tribofilm analysis and friction torque loss in cylindrical roller thrust bearings at constant temperature (2017)
Artigo em Revista Científica Internacional
Hernandez Battez, AH; Carlos M C G Fernandes; Martins, RC; Graca, BM; Anand, M; Blanco, D; Jorge Seabra
Two phosphonium cation-based ionic liquids used as lubricant additive Part I: Film thickness and friction characteristics (2017)
Artigo em Revista Científica Internacional
Hernandez Battez, AH; Carlos M C G Fernandes; Martins, RC; Bartolome, M; Gonzalez, R; Jorge Seabra
Torsional fretting wear experimental analysis of a R3 offshore steel against a PC/ABS blend (2020)
Artigo em Revista Científica Internacional
T. Pandim; T. Doca; A. R. Figueiredo; Francisco M. Andrade Pires
Torque loss of type C40 FZG gears lubricated with wind turbine gear oils (2014)
Artigo em Revista Científica Internacional
Carlos M C G Fernandes; Ramiro C Martins; Jorge. H O Seabra
Torque loss in thrust ball bearings lubricated with wind turbine gear oils at constant temperature (2013)
Artigo em Revista Científica Internacional
Pedro M P Amaro; Ramiro C Martins; Carlos M C G Fernandes; Jorge H O Seabra

Ver todas (56)

Recomendar Página Voltar ao Topo
Copyright 1996-2024 © Faculdade de Ciências da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z  I Livro de Visitas
Última actualização: 2016-03-23 I  Página gerada em: 2024-07-23 às 03:33:29 | Política de Utilização Aceitável | Política de Proteção de Dados Pessoais | Denúncias