Resumo (PT):
A sequential injection methodology with chemiluminescence detection for the evaluation of residual ozone in waters is presented. The procedure is based on the reaction between luminol and ozone without catalysts.
Linear calibration plots were obtained for ozone concentrations between 0.05 and 2.0 mg L-1, with a detection limit of 0.04 mg L-1.
The developed methodology was applied to the determination of residual ozone in ozonized waters and the results complied with those furnished by the spectrophotometric reference procedure (relative deviations < 6.3%). The method exhibited good precision (RSD < 3.5%) and the sampling rate was about 140 determinations per hour.
<br>
<br>
Keywords: Chemiluminescence; Luminol; Ozone; Ozonized water; Sequential injection
<br>
<a target="_blank" href="http://prod.informaworld.com/smpp/content~db=all~content=a933591428~frm=titlelink"> Texto integral </a>
<br>
<br>
Abstract (EN):
A sequential injection methodology with chemiluminescence detection for the evaluation of residual ozone in waters is presented. The procedure is based on the reaction between luminol and ozone without catalysts. Linear calibration plots were obtained for ozone concentrations between 0.05 and 2.0mgL-1, with a detection limit of 0.04mgL-1. The developed methodology was applied to the determination of residual ozone in ozonized waters and the results complied with those furnished by the spectrophotometric reference procedure (relative deviations6.3%). The method exhibited good precision (RSD3.5%) and the sampling rate was about 140 determinations per hour.
Idioma:
Inglês
Tipo (Avaliação Docente):
Científica
Nº de páginas:
10