Separation of synthetic vanillin at different pH onto polymeric adsorbent Sephabeads SP206

• Tipo: Artigo em Revista Científica Internacional
• Data: 2006

Autores

Zabkova, M (Autor) Outra; Otero, M (Autor) Outra; Minceva, M (Autor) Outra; Zabka, M (Autor) Outra; Alírio Rodrigues (Autor) FEUP

Revista

A Revista está pendente de validação pelos Serviços Administrativos.

Título: CHEMICAL ENGINEERING AND PROCESSING

Vol. 45

Páginas: 598-607

ISSN: 0255-2701

Editora: Elsevier Science

Indexação

ISI Proceedings

ISI Web of Knowledge - 15 Citações

Scopus - 13 Citações

Classificação Científica

CORDIS: Ciências Tecnológicas > Engenharia > Engenharia química

Outras Informações

ID Authenticus: P-004-JR8

DOI: 10.1016/j.cep.2006.01.005

Resumo (PT): Adsorption of synthetic vanillin onto non-ionic polymeric resins Sephabeads SP206 by using static and dynamic approach has been investigated. The influence of temperature, flow rate, feed concentration of vanillin and concentration of sodium hydroxide was studied. Batch experiments were carried out in order to obtain adsorption equilibrium isotherms at temperatures 293, 310 and 333 K. The adsorption equilibrium isotherms have been described by the Langmuir model. The impact of sodium hydroxide on the adsorption of vanillin was investigated and for this purpose the modified Langmuir model of isotherm has been used. Increasing concentration of sodium hydroxide has significantly reduced the adsorbed amount of the vanillin onto polymeric adsorbent SP206. The mathematical model includes linear driving force for intraparticle mass transfer and reaction in liquid phase for the system vanillin/sodium hydroxide. (c) 2006 Elsevier B.V. All rights reserved.

Abstract (EN): Adsorption of synthetic vanillin onto non-ionic polymeric resins Sephabeads SP206 by using static and dynamic approach has been investigated. The influence of temperature, flow rate, feed concentration of vanillin and concentration of sodium hydroxide was studied. Batch experiments were carried out in order to obtain adsorption equilibrium isotherms at temperatures 293, 310 and 333 K. The adsorption equilibrium isotherms have been described by the Langmuir model. The impact of sodium hydroxide on the adsorption of vanillin was investigated and for this purpose the modified Langmuir model of isotherm has been used. Increasing concentration of sodium hydroxide has significantly reduced the adsorbed amount of the vanillin onto polymeric adsorbent SP206. The mathematical model includes linear driving force for intraparticle mass transfer and reaction in liquid phase for the system vanillin/sodium hydroxide.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 10