Physics Laboratory III

Code:

FIS3011

Acronym:

FIS3011

Keywords
Classification	Keyword
OFICIAL	Physics

Instance: 2019/2020 - 1S

Active?	Yes
Responsible unit:	Department of Physics and Astronomy
Course/CS Responsible:	Bachelor in Physics

Cycles of Study/Courses

Acronym	No. of Students	Study Plan	Curricular Years	Credits UCN	Credits ECTS	Contact hours	Total Time
L:F	40	Official Study Plan	3	-	6	48	162
MI:EF	38	study plan from 2017/18	3	-	6	48	162

Teaching language

Suitable for English-speaking students

Objectives

To develop the mastering of experimental techniques and tools of modern physics and engineering, by laboratory practice, and involving the accomplishment of experiments, the data analysis, and the critical interpretation of the results. In particular, it is intended to:

• introduce techniques for measurement and analysis of radioactive processes;


• develop basic laboratory skills in optical assemblies;


• introduce precision optical measurement techniques, in particular: interferometry, spectroscopy.


• expand the skills in precision laboratory measurement equipment (lock-in, LCR meter, Hall Sensors, Geiger...)


• introduce advanced methods of measuring the physical properties of condensed matter at different cryogenic temperatures and high temperatures.


• use efficiently automatic data acquisition systems.

Learning outcomes and competences

• competence in the identification, formulation and resolution of physics and engineering problems


• mastering of advanced measurement techniques and use of physics and engineering tools


• application of math, science and engineering knowledge in a laboratory environment


• deepen communication skills in science (oral report and discussion)


• development of skills and willingness in teamwork

Working method

Presencial

Program

Laboratory 3 proposes the accomplishment of a set of experiments framed in Atomic and Nucleic Physics, Solid State Physics and Condensed Matter, and Optics. The experiments introduce the application of precision measurement techniques and techniques for characterizing optical and electrical properties of materials.

The use of specific instruments and laboratory techniques, such as optical interferometers, optical spectrometer, CSF meter, Hall effect, goniometers, heterodyne detection) is introduced, and students are made aware of the correct use of automatic data acquisition and storage. More advanced data processing and analysis techniques are explored,

• evaluation / calibration of the baseline of measurements (radioactivity, magnetic field ...)


• determination of experimental data statistics


• boxcar averages


• determination of characteristic parameters of experimental curves

Some of the experiments aim at the experimental measurement of universal physical constants.

Exemplary list of experiences:

1. Atomic and Nuclear Physics




1. Radioactivity [Geigger Mueller, statistical analysis of data]


2. Radioactive decay statistics.


3. Radioactive half-life study


4. Measure of the Bohr magneton by Zeeman effect [Fabry Perot cavity]




2. Physics of Condensed Matter




1. Hall sensor; Characterization of semiconductor


2. Variation of copper electrical resistivity with temperature. [LCRmeter, thermocouple]


3. Determination of the prohibited band of a semiconductor [Stabilized sources, small currents, thermocouple]


4. Characterization of a superconductor [4-contact technique, measurement automation, cryogenics]




3. Mechanical Engineering




1. Characterization of materials by ultrasound [pulse flight time, piezzo transducer, acoustic impedance, pulse characteristics]




4. Optics




1. Collimated Beams, Lens Imaging, Telescope, 4f Systems [Laboratory Optics Skills]


2. Law of Malus; Polarizer / Analyzer Configuration [Laboratory Optical Skills]


3. Determination of the refractive index of a glass by the method of the minimum deviation of a prism. [Goniometer]


4. Measurement of the n_ar index vs atmospheric pressure [Michelson interferometer]


5. Microscopic measurements with macroscopic rulers (wavelength of a laser, thickness of hair, opaque and transparent structures) [Frauhnhofer diffraction]


6. Characterization of different light sources; Measurements of Reflectance and Absorbance of samples [Spectroscopy]


7. Decay of Rubi Fluorescence. [Spectroscopy]


8. Measurement of the speed of light [Heterodynamic Detection, CW modulation]

Mandatory literature

vários [DFA]; guiões de experiências de LF3

Complementary Bibliography

Colin J. Smithells; Metals reference book. ISBN: 0-408-70627-9
Berendsen Herman J. C.; A student.s guide to data and error analysis. ISBN: 9780521134927
Taylor John R; An introduction to error analysis. ISBN: 0-935702-75-X
Semyon G. Rabinovich; Measurement errors and uncertainties. ISBN: 0-387-98835-1
Barry N. Taylor and Chris E. Kuyatt; Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Result, National Institute of Standards and Tecnhology, 1994. ISBN: online!
John Wulff; The structure and properties of materials. ISBN: 0-471-61265-0 Vol. 1

Comments from the literature

All experimental work is accompanied by a laboratory guide, which will be made available on time through the UC Moodle page.

Teaching methods and learning activities

• Students work in groups of two, and conduct laboratory activities with teacher supervision.


• The laboratories hold a maximum of 16 students per class.


• Each practical laboratory session lasts 4 hours.


• The semester includes a total of 12 sessions of laboratory practice and data processing and analysis.


• New measurement techniques and experimental details of some experiments will be presented and discussed in some of the laboratory sessions.

Software

Python
Gnuplot
ImageJ
Fiji
Scidavis

keywords

Physical sciences > Physics > Applied physics > Experimental physics

Evaluation Type

Distributed evaluation without final exam

Assessment Components

designation	Weight (%)
Prova oral	30,00
Trabalho escrito	35,00
Trabalho laboratorial	35,00
Total:	100,00

Amount of time allocated to each course unit

designation	Time (hours)
Estudo autónomo	30,00
Trabalho escrito	60,00
Trabalho laboratorial	48,00
Trabalho de investigação	24,00
Total:	162,00

Eligibility for exams

To obtain "attendance" at the Course, the student must fulfill the following requirements:

• participate in at least 3/4 of the planned laboratorial sessions.


• deliver two written reports within the deadline indicated by the teachers at the beginning of the class.


• minimum grade of 10 in 20 in the component of submitted scientific reports


• minimum grade of 10 in 20 in the logbook (laboratorial work). 

Calculation formula of final grade

For the calculation of the final classification, four evaluation elements will be taken into account with the following weights:

• Logbook = 35%


• Quality of 2 scientific reports = 35%


• Discussion on reports / practical work = 30%

In the LogBook, the student must sequentially record all the relevant information of all the work developed in this Course, either during the class or during the working time outside the classroom, namely the preparation of the experimental activity, the recording of data obtained , all observations made and analysis of results and conclusions.

The scientific reports to be delivered will be chosen by the professors and must be submitted in digital format (pdf) within the two weeks after the laboratory work.

At the end of the semester there will be an individual discussion with the students on the two reports and the activities carried out in the laboratory.

Special assessment (TE, DA, ...)

Since all assessment components require laboratory work, it is recommended that all students in this situation contact the teacher in order to make the practical component possible in a flexible schedule, using the time of attendance.

Classification improvement

Upon submission of the first report, students will receive information and suggestions for its improvement. With this information, they will have the opportunity to submit the first report for re-evaluation (within deadlines set at the start of the UC).

Given the experimental nature of the course, the final grade can only be improved in the following school year, pursuant to Article 12 (2) (b) of the FCUP “Student Assessment to the course unit. This registration is made at the beginning of the school year and is counted in the maximum credits to which the student can enroll.

Observations

The juri of the UC is composed by: 
- Carla Susana Santana Carmelo Rosa
- André Miguel Trindade Pereira
- José Luís Campos de Oliveira Santos