Debugging mixed-signals circuits via the IEEE1149.4 – a built-in mixed condition detector

• Tipo: Artigo em Livro de Atas de Conferência Internacional
• Data: 2007

Autores

Manuel C. Felgueiras (Autor) Outra; Gustavo R. Alves (Autor) Outra; José M. M. Ferreira (Autor) FEUP

Ata de Conferência Internacional

Título: Proceedings of the 22nd Conference on Design of Circuits and Integrated Systems (DCIS 07)

Páginas: 1-6

22nd Conference on Design of Circuits and Integrated Systems (DCIS 07)

Sevilha, Espanha, 21 a 23 de Novembro de 2007

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia electrotécnica, electrónica e informática

Outras Informações

Abstract (EN): Diagnosing design faults in a mixed-signals circuit is no trivial task, due to the inherent uncertainties associated with analog signals, not mentioning the interaction between the analog part and the digital part. Using debug and test tools is one way to deal with the problem, especially during the prototyping phase, however if a physical access is required then the same restrictions that led to other solutions, based on electronic access, apply. This is particularly the case that led to the emergence and wide acceptance of the IEEE1149 family of test infrastructures, which relies on an electronic test access port. While the IEEE1149.4 test infrastructure enables the structural and parametric test of mixed-signal boards, its use is still far from reaching a wide acceptance, namely due to the lack of alternative applications, such as debugging, as it is the case in the 1149.1 domain of purely digital circuits. Building upon the rationale that enabled transferring the structural test of board interconnections between analog pins, from the analog domain to the digital domain, using the mechanisms present in an Analog Boundary Module, as defined in the IEEE1149.4 std., we propose a new way to support debug operations in 1149.4 mixed-signal circuits. In particular, we describe a built-in mechanism able to detect both internal and pin-level mixed-signal conditions, and hence able to support watchpoint/breakpoint operations at the IC level.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 6