Solid phase microextraction method for characterizing the organic fraction of an industrial brine stream

• Tipo: Artigo em Revista Científica Internacional
• Data: 2013

Autores

João F. B. Lima (Autor) FEUP; Arménio G. da Costa (Autor) Outra; Carlos M. Silva (Autor) Outra; Francisco A. da Silva (Autor) Outra; Adélio Mendes (Autor) FEUP

Revista

Título: Desalination and Water Treatment

Páginas: 4630-4637

ISSN: 1944-3994

Editora: Desalination Publications

Indexação

ISI Web of Knowledge - 0 Citações

ISI Web of Science

Scopus - 0 Citações

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia química

Projetos Associados

PEst-C/EQB/UI0511/2011 - PROJECTO ESTRATÉGICO - UI 511 - 2011-2012

Outras Informações

ID Authenticus: P-006-ACH

DOI: 10.1080/19443994.2012.758599

Abstract (EN): The manufacturing process of DOW Chemical Company in Portugal produces a brine stream containing organic contaminants. For recovering the sodium chloride by-product, it is necessary to fully characterize this brine stream. With this purpose, a direct immersion-solid phase microextraction-gas chromatograph (SPME-GC) analytical method was successfully optimized and implemented, being possible to quantify accurately, with reproducibility, the organic fraction at ppb levels. The effects of salt content, extraction time, temperature, and pH were investigated, and the SPME experimental conditions optimized. For the poly(dimethylsyloxane-co-divinylbenzene) fiber utilized, the resulting parameters were: 25% (wt.) of NaCl, 30¿min, 20°C, and pH 11. The fiber desorption was performed at 250°C for 15¿min. The calibration curves of the representative organics of the brine (benzenamine, cyclohexanamine, 2-methylbenzenamine, N¿cyclohexylcyclohexanamine, cyclohexyl alcohol, nitrobenzene, cyclohexanone, and 4-phenylcyclohexylamine) presented good correlation coefficients (0.991¿¿¿R 2 ¿¿¿0.997). The detection limits of the method were determined for each species for the optimized analytical conditions; the detection limits vary from 0.21 to 3.22¿ppb, respectively for N¿cyclohexylcyclohexanamine and benzenamine, the, precision ranged from 4.4 to 8.7% RSD and the validation criteria was obeyed for all analytes. The industrial brine stream was then characterized during several days to register the concentration history of contaminants. Independently of the stream composition fluctuations, the SPME methodology developed and optimized in this work was able to assess accurately their concentrations at ppb levels.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Notas: Publicação abrangida pelo Journal Citation Reports 2015

Nº de páginas: 8