Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > On the efficient enforcement of uniform traction and mortar periodic boundary conditions in computational homogenisation

On the efficient enforcement of uniform traction and mortar periodic boundary conditions in computational homogenisation

Título
On the efficient enforcement of uniform traction and mortar periodic boundary conditions in computational homogenisation
Tipo
Artigo em Revista Científica Internacional
Ano
2021
Autores
Ferreira, BP
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Revista
Vol. 384
ISSN: 0045-7825
Editora: Elsevier
Outras Informações
ID Authenticus: P-00V-4V3
Abstract (EN): In this contribution, the enforcement of uniform traction (UT) and periodic boundary (PB) conditions on arbitrarily generated meshes is analysed in detail, and the derivation of the associated macroscopic consistent tangent operators is described. Two different approaches to impose these boundary conditions are examined: the saddle point solution (SPS) resulting from the Lagrange multiplier method and the condensation method (CM). The numerical treatment required to implement the UT and the PB conditions with both methods is presented for rectangular and cuboidal representative volume elements (RVEs). It is shown that the UT condition only needs rigid body motion to be prescribed since it intrinsically restricts rigid body rotations in the finite strain setting. The application of the SPS to the UT condition leads to a formulation where the Lagrange multipliers are the homogenised stresses, and the macroscopic consistent tangent operator for FE2 simulations can be directly derived. The enforcement of PB conditions on non-conforming meshes with the mortar approach is also described for the CM and SPS. The need to modify the Lagrange multiplier dual interpolation functions is emphasised to avoid over-constraints. The proposed implementation recovers the conventional PB condition solution when conforming meshes are used. The computational performance of both methods is compared in terms of time and memory requirements. As anticipated, the results obtained for each boundary condition do not depend on the enforcement method employed. With the direct solvers employed, the SPS is more efficient despite increasing the number of unknowns in the linear system of equations.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 39
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Da mesma revista

The influence of numerical parameters in the calculation of gas turbine combustor flows (1992)
Artigo em Revista Científica Internacional
McGuirk, JJ; José Laginha Palma
Second-order multi-scale modelling of natural and architected materials in the presence of voids: Formulation and numerical implementation (2023)
Artigo em Revista Científica Internacional
dos Santos, WF; Lopes, IAR; F.M. Andrade Pires; Proença, SPB
On the finite element prediction of damage growth and fracture initiation in finitely deforming ductile materials (2004)
Artigo em Revista Científica Internacional
F. M. Andrade Pires; E. A. de Souza Neto; D. R. J. Owen
Novel efficient method for structural reliability analysis using hybrid nonlinear conjugate map-based support vector regression (2021)
Artigo em Revista Científica Internacional
Behrooz Keshtegar; Mohamed El Amine Ben Seghier; Enrico Zio; José A. F. O. Correia; Shun-Peng Zhu; Nguyen-Thoi Trung

Ver todas (19)

Recomendar Página Voltar ao Topo
Copyright 1996-2024 © Serviços Partilhados da Universidade do Porto I Termos e Condições I Acessibilidade I Índice A-Z I Livro de Visitas
Página gerada em: 2024-09-27 às 18:38:24 | Política de Utilização Aceitável | Política de Proteção de Dados Pessoais | Denúncias