Go to:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Start > Publications > View > Thermo-chemo-hygro-mechanical simulation of the restrained shrinkage ring test for cement-based materials under distinct drying conditions
Publication

Thermo-chemo-hygro-mechanical simulation of the restrained shrinkage ring test for cement-based materials under distinct drying conditions

Title
Thermo-chemo-hygro-mechanical simulation of the restrained shrinkage ring test for cement-based materials under distinct drying conditions
Type
Article in International Scientific Journal
Year
2021
Authors
Fragkoulis Kanavaris
(Author)
Other
The person does not belong to the institution. The person does not belong to the institution. The person does not belong to the institution. Without AUTHENTICUS Without ORCID
Cláudio Ferreira
(Author)
Other
The person does not belong to the institution. The person does not belong to the institution. The person does not belong to the institution. Without AUTHENTICUS Without ORCID
Carlos Sousa
(Author)
FEUP
View Personal Page You do not have permissions to view the institutional email. Search for Participant Publications View Authenticus page Without ORCID
Miguel Azenha
(Author)
Other
The person does not belong to the institution. The person does not belong to the institution. The person does not belong to the institution. Without AUTHENTICUS Without ORCID
Journal
Vol. 294
Pages: 1-17
ISSN: 0950-0618
Publisher: Elsevier
Indexing
Other information
Authenticus ID: P-00V-3XA
Abstract (EN): A thermo-chemo-hygro-mechanical (TCHM) simulation approach for modelling the concrete behaviour during restrained shrinkage ring tests under two distinct drying conditions, namely, top and bottom as well as circumferential drying, is presented herein. The models were calibrated using data from an extensive round robin testing programme, which involved measurements on the time dependent properties of a specific concrete mix. Experiments and simulations accounted for the evolution of cement hydration, moisture diffusion, mechanical and viscoelastic properties and concrete fracture. The modelling approach was validated using results from an unrestrained shrinkage prism test and a restrained shrinkage ring test under top and bottom drying, and insights are obtained for the behaviour of restrained concrete rings under the two distinct drying conditions. It was observed that drying develops faster in rings under top and bottom drying compared to those under circumferential drying and so develops microcracking which is initiated at the steel & ndash;concrete interface. Conversely for circumferential drying, microcracking firstly occurs at the outer circumference due to the self-restraining effects arising from moisture gradients and is eventually induced in the steel & ndash;concrete interface. The top and bottom drying condition may be adopted for shorter testing duration; however, it does not encapsulate the self-restraining effects well.
Language: English
Type (Professor's evaluation): Scientific
No. of pages: 17
Documents
We could not find any documents associated to the publication with allowed access.
Related Publications

Of the same journal

The influence of the thickness of the walls and their properties on the treatment of rising damp in historic buildings (2010)
Another Publication in an International Scientific Journal
Torres, I; Vasco Peixoto De Freitas
Study of strengthening solutions for glued-laminated wood beams of maritime pine wood (2009)
Another Publication in an International Scientific Journal
Alfredo S Ribeiro; Abilio M P de Jesus; Antonio M Lima; Jose L C Lousada
Physical characterization and compression tests of one leaf stone masonry walls (2012)
Another Publication in an International Scientific Journal
Almeida, C; Paulo Guedes, JP; Arede, A; Costa, CQ; Costa, A
Out-of-plane behavior of masonry infilled RC frames based on the experimental tests available: A systematic review (2018)
Another Publication in an International Scientific Journal
Furtado, A; Rodrigues, H; António Arêde; Humberto Varum
Mortar with wood waste ash: Mechanical strength carbonation resistance and ASR expansion (2013)
Another Publication in an International Scientific Journal
Telma Ramos; Ana Mafalda Matos; Joana Sousa Coutinho

See all (111)

Recommend this page Top
Copyright 1996-2024 © Serviços Partilhados da Universidade do Porto I Terms and Conditions I Acessibility I Index A-Z I Guest Book
Page created on: 2024-08-17 15:21:41 | Acceptable Use Policy | Data Protection Policy | Complaint Portal