Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Enhanced thermal stability of poly(methyl methacrylate) composites with fullerenes

Publicações

Enhanced thermal stability of poly(methyl methacrylate) composites with fullerenes

Título
Enhanced thermal stability of poly(methyl methacrylate) composites with fullerenes
Tipo
Artigo em Revista Científica Internacional
Ano
2015
Autores
Gaspar, H
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Ver página do Authenticus Sem ORCID
Fernandes, L
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Pereira, P
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Revista
Título: Polymer BulletinImportada do Authenticus Pesquisar Publicações da Revista
Vol. 72
Páginas: 1775-1786
ISSN: 0170-0839
Editora: Springer Nature
Outras Informações
ID Authenticus: P-00G-AY7
Abstract (EN): The thermal stability of poly(methyl methacrylate) (PMMA) composites with the two fullerenes C-60 and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM), was studied over the whole composition range under nitrogen (N-2) and air atmosphere using dynamic thermogravimetric analysis (TGA). The aim of this study was to compare the thermal stabilization effect of both fullerenes on PMMA. When compared with pure PMMA, both C-60 and PCBM increase substantially the thermal degradation temperature of the corresponding composites, both in nitrogen and air atmospheres. The amounts of C-60 and PCBM in the PMMA composites can be successfully determined along the whole composition range using TGA. The initial amounts of fullerene present in the composites correlates linearly with the residual mass values obtained above 450 degrees C in nitrogen and with the residual mass values observed at the temperatures of transition from the first to the second decomposition steps in air. There are no significant differences between the thermal stabilization effects of C-60 and PCBM in both atmospheres (nitrogen and air).
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 12
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Dos mesmos autores

Melt processed polyethylene/fullerene nanocomposites with highly improved thermo-oxidative stability (2015)
Artigo em Revista Científica Internacional
Pereira, P; Fernandes, L; Gaspar, H; Bernardo, G
Impact of fullerenes on the thermal stability of melt processed polystyrene and poly(methyl methacrylate) composites (2015)
Artigo em Revista Científica Internacional
Pereira, P; Gaspar, H; Fernandes, L; Bernardo, G

Da mesma revista

Thermal stability of low-bandgap copolymers PTB7 and PTB7-Th and their bulk heterojunction composites (2018)
Artigo em Revista Científica Internacional
Fernandes, L; Gaspar, H; Tome, JPC; Figueira, F; Bernardo, G
Effect of filler type on properties of PBAT/organoclay nanocomposites (2019)
Artigo em Revista Científica Internacional
Tiago T. Santos; Tatiara G. Almeida; Dayanne D. S. Morais; Fernão D. Magalhães; Rui M. Guedes; Laura H. Carvalho; Eduardo L. Canedo
Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Direito da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-07-23 às 23:42:40 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias