Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Tribocorrosion behavior of bio-functionalized highly porous titanium

Publicações

Tribocorrosion behavior of bio-functionalized highly porous titanium

Título
Tribocorrosion behavior of bio-functionalized highly porous titanium
Tipo
Artigo em Revista Científica Internacional
Ano
2017
Autores
Toptan, F
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Alves, AC
(Autor)
Outra
Pinto, AMP
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Ponthiaux, P
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Revista
Vol. 69
Páginas: 144-152
ISSN: 1751-6161
Editora: Elsevier
Outras Informações
ID Authenticus: P-00M-SCP
Abstract (EN): Titanium and its alloys are widely used in orthopedic and dental implants, however, some major clinical concerns such as poor wear resistance, lack of bioactivity, and bone resorption due to stress shielding are yet to be overcome. In order to improve these drawbacks, highly porous Ti samples having functionalized surfaces were developed by powder metallurgy with space holder technique followed by anodic treatment. Tribocorrosion tests were performed in 9 g/L NaCl solution using a unidirectional pin-on-disc tribometer under 3 N normal load, 1 Hz frequency and 4 mm track diameter. Open circuit potential (OCP) was measured before, during and after sliding. Worn surfaces investigated by field emission gun scanning electron microscope (FEG-SEM) equipped with energy dispersive X-ray spectroscopy (EDS). Results suggested bio-functionalized highly porous samples presented lower tendency to corrosion under sliding against zirconia pin, mainly due to the load carrying effect given by the hard protruded oxide surfaces formed by the anodic treatment.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 9
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Dos mesmos autores

Corrosion behaviour of porous Ti intended for biomedical applications (2016)
Artigo em Revista Científica Internacional
Alves, AC; Sendao, I; Ariza, E; Toptan, F; Ponthiaux, P; Pinto, AMP

Da mesma revista

The effect of thermal cycling on the shear bond strength of porcelain/Ti-6Al-4V interfaces (2015)
Artigo em Revista Científica Internacional
Sendao, IA; Alves, AC; Galo, R; Toptan, F; Silva, FS; Ariza, E
The double cantilever beam test applied to mode I fracture characterization of cortical bone tissue (2010)
Artigo em Revista Científica Internacional
Morais, JJL; de Moura, MFSF; Pereira, FAM; Xavier, J; Dourado, N; Dias, MIR; Azevedo, JMT
Patient-specific surrogate model to predict pelvic floor dynamics during vaginal delivery (2024)
Artigo em Revista Científica Internacional
Moura, R; Oliveira, DA; Parente, MPL; Kimmich, N; Hyncík, L; Hympánová, LH; Renato Natal Jorge
On the effect of labour durations using an anisotropic visco-hyperelastic-damage approach to simulate vaginal deliveries (2018)
Artigo em Revista Científica Internacional
M. C. P. Vila Pouca; J.P.S. Ferreira; D. A. Oliveira; Parente, MPL; Teresa Mascarenhas; Renato M. Natal Jorge
Mixed-Mode I+II Fracture Characterization of Human Bone using the SLB Test (2016)
Artigo em Revista Científica Internacional
de Moura, MFSF; Filipe Silva; N. Dourado; J. Xavier; F.A.M. Pereira; J.J.L. Morais; M. I. R. Dias

Ver todas (26)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Direito da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-08-30 às 16:59:17 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias