Influence of processing method of CoCrMo dental alloy on the corrosion behavior in artificial saliva

• Tipo: Artigo em Revista Científica Internacional
• Data: 2022

Autores

Pontes, JR (Autor) Outra; Toptan, F (Autor) Outra; Pinto, AMP (Autor) Outra; Ariza, E (Autor) Outra; Alves, AC (Autor) FEUP

Revista

A Revista está pendente de validação pelos Serviços Administrativos.

Título: MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION

Vol. 74

Páginas: 576-584

ISSN: 0947-5117

Indexação

ISI Web of Knowledge - 0 Citações

Scopus

Outras Informações

ID Authenticus: P-00X-E6R

DOI: 10.1002/maco.202213562

Abstract (EN): Removable or fixed dental frameworks are usually made of CoCr alloys. The CoCr dental alloys are produced traditionally by lost-wax casting. However, alternative processing routes, such as hot-pressing, are being studied for dental applications. The purpose of the present work was to assess the corrosion resistance of CoCrMo dental alloy produced by conventional lost-wax casting and hot-pressing. The corrosion behavior was studied in artificial saliva at 37 degrees C by potentiodynamic polarisation tests. Immersion tests were performed to evaluate the growth of the passive film where electrochemical impedance spectroscopy was used at different immersion periods. Results showed slightly better corrosion resistance in terms of i(pass) for CoCrMo samples obtained by hot-pressing. On the other hand, the immersion tests showed a more stable and thicker passive film formed on hot-pressed CoCrMo dental alloy, pointing out that hot-pressing may be considered a promising technique to produce CoCrMo dental structures.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 9