Mechanical and Corrosion Behaviour in Simulated Body Fluid of As-Fabricated 3D Porous L-PBF 316L Stainless Steel Structures for Biomedical Implants

• Tipo: Artigo em Revista Científica Internacional
• Data: 2024

Autores

Nogueira, P (Autor) Outra; Magrinho, J (Autor) Outra; Reis, L (Autor) Outra; de Deus, AM (Autor) Outra; Silva, MB (Autor) Outra; Lopes, P (Autor) Outra; Oliveira, L (Autor) Outra; Castela, A (Autor) Outra; Cláudio, R (Autor) Outra; Jorge Lino (Autor) FEUP; Vaz, MF (Autor) Outra; Carmezim, M (Autor) Outra; Santos, C (Autor) Outra

Revista

Título: JOURNAL OF FUNCTIONAL BIOMATERIALS

Vol. 15

Página Final: 313

Editora: MDPI

Indexação

ISI Web of Knowledge - 0 Citações

Scopus - 0 Citações

Outras Informações

ID Authenticus: P-017-82S

DOI: 10.3390/jfb15100313

Abstract (EN): Laser powder bed fusion (L-PBF) is one of the most promising additive manufacturing technologies for creating customised 316L Stainless Steel (SS) implants with biomimetic characteristics, controlled porosity, and optimal structural and functional properties. However, the behaviour of as-fabricated 3D 316L SS structures without any surface finishing in environments that simulate body fluids remains largely unknown. To address this knowledge gap, the present study investigates the surface characteristics, the internal porosity, the corrosion in simulated body fluid (SBF), and the mechanical properties of as-fabricated 316L SS structures manufactured by L-PBF with rhombitruncated cuboctahedron (RTCO) unit cells with two distinct relative densities (10 and 35%). The microstructural analysis confirmed that the RTCO structure has a pure austenitic phase with a roughness of similar to 20 mu m and a fine cellular morphology. The micro-CT revealed the presence of keyholes and a lack of fusion pores in both RTCO structures. Despite the difference in the internal porosity, the mechanical properties of both structures remain within the range of bone tissue and in line with the Gibson and Ashby model. Additionally, the as-fabricated RTCO structures demonstrated passive corrosion behaviour in the SBF solution. Thus, as-fabricated porous structures are promising biomaterials for implants due to their suitable surface roughness, mechanical properties, and corrosion resistance, facilitating bone tissue growth.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 19