Alternative treatments for footwear industry liquid effluents - Part 3 - Pressure wet hydrogen peroxide oxidation

• Tipo: Artigo em Revista Científica Internacional
• Data: 2002

Autores

M. J. Ferreira (Autor) Outra; Manuel Fonseca Almeida (Autor) FEUP; Sílvia C. Pinho (Autor) FEUP; A. Neves (Autor) Outra

Revista

Título: Journal of the Society of Leather Technologies and Chemists

Vol. 86 Nº 4

Páginas: 148-152

ISSN: 0144-0322

Editora: Society of Leather Technologists and Chemists

Indexação

ISI Web of Knowledge - 0 Citações

Scopus - 1 Citação

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Outras ciências da engenharia e tecnologias

CORDIS: Ciências Tecnológicas

Outras Informações

ID Authenticus: P-000-NWG

Abstract (EN): Footwear industry finishing operations generate non-biodegradable liquid effluents having a high organic load, mainly due to dyes, organic acids and organic solvents. Coagulation/flocculation followed by carbon adsorption is one option for treating these effluents, since it may allow the discharge of the final effluent to sewage systems but not to water courses. The process is of dubious utility due to the sludge produced and the required adsorbent amount. Such limitations pushed the research towards wet oxidation (WO) already tested with oxygen as oxidant.(1) The reduction of effluent chemical oxygen demand (COD) with this treatment at 200degreesC ranges from 50 - 80%, depending on the conditions and the initial COD of the wastewaters. However, residual COD values are too high for discharging the effluent to public sewage systems. Therefore, WO using hydrogen peroxide is the alternative method tested here. The experiments carried out evaluated the influence of temperature, time, H2O2 dose and pH on the reduction of effluent chemical oxygen demand (COD) and other characteristics of the wastewaters. The catalytic effect of iron on the WO treatment efficiency was also evaluated.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 5