Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Morphological and Structural Characteristics presented by the Cu-Sn-Cu Metallurgical System Used in Electronic Joints

Publicações

Morphological and Structural Characteristics presented by the Cu-Sn-Cu Metallurgical System Used in Electronic Joints

Título
Morphological and Structural Characteristics presented by the Cu-Sn-Cu Metallurgical System Used in Electronic Joints
Tipo
Artigo em Revista Científica Internacional
Ano
2000
Autores
J. Ferreira
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
B. Fernandes
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
C. Gonçalves
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
P. Nunes
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
E. Fortunato
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
A. P. Marvão
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
R. Martins
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
José Inácio Martins
(Autor)
FEUP
Revista
Vol. 288 2
Páginas: 248-252
ISSN: 0921-5093
Editora: Elsevier Science
Indexação
Publicação em ISI Web of Science ISI Web of Science
Publicação em Scopus Scopus
COMPENDEX
Outras Informações
Resumo (PT):
Abstract (EN): Results are presented concerning the morphological and structural characteristics exhibited by the Cu-Sn-Cu system to be used in electronic lead-free soldering processes, under different process temperatures and pressures. The results show that the Cu3Sn or Cu6Sn5 phases needed to supply the thermal, mechanical and electrical stability to the joints formed require Sn layers (either electrodeposited or by using preforms) whose thickness depends on the process temperature used. For process temperatures of 533 K the thickness of the Sn layer should be above 20 mu m, while for process temperatures of 573 K, the Sn thickness required is reduced to 10 mu m. The joints formed support shear stresses above 12 MPa, as required by electronic standards. Apart from that, microcracks start appearing if an excess of Sn is used during the soldering operation. The set of tests performed indicates that this new joint is quite promising to substitute the conventional solder process applied to power diodes. (C) 2000 Elsevier Science S.A. All rights reserved.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 5
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Da mesma revista

Role of Soldering Parameters on the Electrical Perforances Presented by Cu-Sn-Cu Joins Used in Power Diodes (2000)
Artigo em Revista Científica Internacional
R. Martins; J. Ferreira; C. Gonçalves; P. Nunes; E. Fortunato; A. P. Marvão; José Inácio Martins
Prediction of the Forming Limit Diagrams of Anisotropic Sheets in Linear and Non-Linear Loading (1985)
Artigo em Revista Científica Internacional
Augusto Barata da Rocha; F. Barlat; J. Jaliner
Multilayered interface in Ti/Macor machinable glass-ceramic joints (2001)
Artigo em Revista Científica Internacional
A. Guedes; A. M. P. Pinto; M. Vieira; F.Viana
Mechanical characterisation of gama-TiAl thin films obtained by two different sputtering routes (2002)
Artigo em Revista Científica Internacional
M. T. Vieira; B. Trindade; A. S. Ramos; J Fernandes; Manuel Vieira
A Methodology Development for the Study of Near Surface Stress Gradients (2000)
Artigo em Revista Científica Internacional
Maria José Marques; A. M. Dias; P. Gergaud; J. L. Lebrun
Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Direito da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-07-24 às 16:54:40 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias