Kinetic studies in a batch reactor using ion exchange resin catalysts for oxygenates production: the role of mass transfer mechanisms

• Tipo: Artigo em Revista Científica Internacional
• Data: 2006

Autores

Viviana Silva (Autor) FEUP; Alírio Rodrigues (Autor) FEUP

Revista

Título: Chemical Engineering Science

Vol. 61 Nº 2

Páginas: 316-331

ISSN: 0009-2509

Editora: Elsevier

Indexação

ISI Proceedings

Classificação Científica

CORDIS: Ciências Tecnológicas > Engenharia > Engenharia química

Outras Informações

Resumo (PT): Oxygenated compounds are usually produced by a reversible liquid phase reaction using ion exchange resins with a bidisperse pore structure as catalyst. Mass transport is mainly controlled by diffusion through the macropores and the mass transfer resistance in the gel microspheres is negligible. Therefore, in this paper a mathematical model of the batch reactor considering diffusion of the species in the external film and then macropore diffusion inside the particle and reaction in the gel microspheres was developed. The numerical solution is implemented through the numerical package PDECOL and detailed explanations of the procedure used are presented. The model was applied to the diethylacetal synthesis using ethanol and acetaldehyde as reactants and Amberlyst 18 as catalyst. The experimental data are fitted with a two-parameter model based on a Langmuir-Hinshelwood rate expression in order to get the true reaction kinetics. The influence of the mass transfer mechanisms is evaluated in terms of the effectiveness factor history during the transient state of the batch reactor. The values of the effectiveness factor calculated at equilibrium with the batch reactor model are compared with those calculated from a steady state infinite bath model. (c) 2005 Elsevier Ltd. All rights reserved.

Abstract (EN): Oxygenated compounds are usually produced by a reversible liquid phase reaction using ion exchange resins with a bidisperse pore structure as catalyst. Mass transport is mainly controlled by diffusion through the macropores and the mass transfer resistance in the gel microspheres is negligible. Therefore, in this paper a mathematical model of the batch reactor considering diffusion of the species in the external film and then macropore diffusion inside the particle and reaction in the gel microspheres was developed. The numerical solution is implemented through the numerical package PDECOL and detailed explanations of the procedure used are presented. The model was applied to the diethylacetal synthesis using ethanol and acetaldehyde as reactants and Amberlyst 18 as catalyst. The experimental data are fitted with a two-parameter model based on a Langmuir-Hinshelwood rate expression in order to get the true reaction kinetics. The influence of the mass transfer mechanisms is evaluated in terms of the effectiveness factor history during the transient state of the batch reactor. The values of the effectiveness factor calculated at equilibrium with the batch reactor model are compared with those calculated from a steady state infinite bath model. (c) 2005 Elsevier Ltd. All rights reserved.

Idioma: Português

Tipo (Avaliação Docente): Científica