Compact Printed Monopole Antenna With Chip Inductor for WLAN

• Tipo: Artigo em Revista Científica Internacional
• Data: 2011

Autores

Q. Luo (Autor) Outra; J. R. Pereira (Autor) Outra; H. M. Salgado (Autor) FEUP

Revista

Título: IEEE Antennas and Wireless Propagation Letters

Vol. 10

Páginas: 880-883

ISSN: 1536-1225

Editora: IEEE

Indexação

ISI Web of Knowledge - 21 Citações

ISI Web of Science

Scopus - 20 Citações

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia electrotécnica, electrónica e informática

CORDIS: Ciências Tecnológicas > Engenharia > Engenharia de comunicações > Engenharia de telecomunicações

Outras Informações

ID Authenticus: P-002-X7G

DOI: 10.1109/lawp.2011.2166049

Abstract (EN): One compact printed monopole antenna with a chip inductor for dual-band WLAN is presented. The proposed antenna has a two-armed structure and an electrically small size. The equivalent circuit structure of the chip inductor is studied and a simplified circuit structure is proposed. This simplified circuit structure was introduced into the electromagnetic (EM) simulation model by assigning a boundary condition, and the experimental results show that with this model, the simulation can provide an accurate prediction of the antenna radiation performance. The measurement results show that the proposed monopole antenna has a VSWR 2: 1 bandwidth over 2.41-2.49 and 5.2-5.6 GHz with omnidirectional radiation patterns. The simulation results suggest that the proposed antenna has a directivity around 1.5 dB at both bands with relatively high radiation efficiency. The antenna is designed and optimized by using Ansoft HFSS.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 4