Biodiesel production using oil from fish canning industry wastes

• Tipo: Artigo em Revista Científica Internacional
• Data: 2013

Autores

J. F. Costa (Autor) FEUP; M. F. Almeida (Autor) FEUP; M. C. M. Alvim-Ferraz (Autor) FEUP; J. M. Dias (Autor) FEUP

Revista

Título: Energy Conversion and Management

Vol. 74

Páginas: 17-23

ISSN: 0196-8904

Editora: Elsevier

Indexação

ISI Web of Knowledge - 48 Citações

ISI Web of Science

Scopus - 69 Citações

INSPEC

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia do ambiente

CORDIS: Ciências Naturais > Ciências do ambiente

Projetos Associados

ValorPeixe - Valorização de Subprodutos e Águas Residuais da Indústria de Conservas de Peixe

Outras Informações

ID Authenticus: P-006-6NM

DOI: 10.1016/j.enconman.2013.04.032

Abstract (EN): The present study evaluated biodiesel production using oil extracted from fish canning industry wastes, focusing on pre-treatment and reaction conditions. Experimental planning was conducted to evaluate the influence of acid catalyst concentration (1-3 wt.% H2SO4) in the esterification pre-treatment and the amount of methanolic solution (60-90 vol.%) used at the beginning of the further two-step alkali transesterification reaction. The use of a raw-material mixture, including waste oil obtained from olive oil bagasse, was also studied. The results from experimental planning showed that catalyst concentration mostly influenced product yield and quality, the best conditions being 1 wt.% catalyst and 60 vol.% of methanolic solution, to obtain a product yield of 73.9 wt.% and a product purity of 75.5 wt.%. Results from a one-step reaction under the selected conditions showed no advantage of performing a two-step alkali process. Although under the best conditions several of the biodiesel quality parameters were in agreement with standard specifications, a great variation was found in the biodiesel acid value, and oxidation stability and methyl ester content did not comply with biodiesel quality standards. Aiming to improve fuel quality, a mixture containing 80% waste olive oil and 20% of waste fish oil was evaluated. Using such mixture, biodiesel purity increased around 15%, being close to the standard requirements (96.5 wt.%), and the oxidation stability was in agreement with the biodiesel quality standard values (>= 6 h), which are promising results clearly showing the potential of using such wastes, of very low value, for biodiesel production.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 7