Single lap joints loaded in tension with high strength steel adherends

• Tipo: Artigo em Revista Científica Internacional
• Data: 2013

Autores

Karachalios, EF (Autor) Outra; Adams, RD (Autor) Outra; Lucas F M da Silva (Autor) FEUP

Revista

Título: International Journal of Adhesion and Adhesives

Vol. 43

Páginas: 81-95

ISSN: 0143-7496

Editora: Elsevier

Indexação

ISI Web of Knowledge - 60 Citações

Scopus - 84 Citações

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia química

Outras Informações

ID Authenticus: P-005-0KF

DOI: 10.1016/j.ijadhadh.2013.01.016

Abstract (EN): Single lap joints in many different geometric and material configurations were analysed using finite element analysis and tested in tension. Geometric parameters, such as the overlap length and adherend thickness, together with material parameters such as the adherend and adhesive stress-strain behaviour, were all tested. The mechanisms and modes of failure were observed for different cases, and positions of damage initiation were identified. Failure patterns were related to failure mechanisms. A failure prediction methodology has been proposed and a good correlation was obtained between the experimental and finite element predictions of strength for a variety of joint configurations. The study is presented in two parts. In the first (present paper), high strength steel adherends are considered and in the second paper ductile steel adherends are studied. For high strength steel adherends and a relatively short overlap, failure is dominated by adhesive global yielding. As the overlap gets longer, however, failure is no longer due to global yielding, but due to high local shear strains.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 15