Femtosecond laser micromachining of an optofluidics-based monolithic whispering-gallery mode resonator coupled to a suspended waveguide

• Tipo: Artigo em Revista Científica Internacional
• Data: 2021

Autores

Maia, JM (Autor) Outra; Amorim, VA (Autor) Outra; Viveiros, D (Autor) FCUP; Marques, PVS (Autor) FCUP

Revista

Título: Scientific Reports

Vol. 11

ISSN: 2045-2322

Editora: Springer Nature

Indexação

ISI Web of Knowledge - 7 Citações

Scopus - 9 Citações

Outras Informações

ID Authenticus: P-00T-X6V

DOI: 10.1038/s41598-021-88682-x

Abstract (EN): A monolithic lab-on-a-chip fabricated by femtosecond laser micromachining capable of label-free biosensing is reported. The device is entirely made of fused silica, and consists of a microdisk resonator integrated inside a microfluidic channel. Whispering gallery modes are excited by the evanescent field of a circular suspended waveguide, also incorporated within the channel. Thermal annealing is performed to decrease the surface roughness of the microstructures to a nanometric scale, thereby reducing intrinsic losses and maximizing the Q-factor. Further, thermally-induced morphing is used to position, with submicrometric precision, the suspended waveguide tangent to the microresonator to enhance the spatial overlap between the evanescent field of both optical modes. With this fabrication method and geometry, the alignment between the waveguide and the resonator is robust and guaranteed at all instances. A maximum sensitivity of 121.5 nm/RIU was obtained at a refractive index of 1.363, whereas near the refractive index range of water-based solutions the sensitivity is 40 nm/RIU. A high Q-factor of 10(5) is kept throughout the entire measurement range.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 10