Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Numerical simulation of the non-linear deformation of 5-harness satin weaves

Publicações

Numerical simulation of the non-linear deformation of 5-harness satin weaves

Título
Numerical simulation of the non-linear deformation of 5-harness satin weaves
Tipo
Artigo em Revista Científica Internacional
Ano
2012
Autores
P. P. Camanho
(Autor)
FEUP
S. T. Pinho
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Revista
Vol. 61 8
Páginas: 116-126
ISSN: 0927-0256
Editora: Elsevier
Classificação Científica
FOS: Ciências da engenharia e tecnologias > Engenharia dos materiais
CORDIS: Ciências Tecnológicas > Engenharia > Engenharia de simulação
Outras Informações
ID Authenticus: P-002-7T5
Abstract (EN): The mechanical behaviour of a polymer composite reinforced by 5-harness satin weave is modelled using a micromechanical approach in which each of its constituents is characterised by a constitutive damage model. The epoxy matrix is modelled using an elasto-plastic with isotropic damage law while the fibrous reinforcements follow a transversely isotropic damage law. A representative unit cell of a 5-harness satin weave has been generated and a set of periodic boundary conditions implemented in order to run micromechanical analyses. Volumetric homogenisation is performed on the obtained micro-stress and -strain fields in order to study stiffness degradation and damage evolution of the satin weave under different in-plane multiaxial loading conditions.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Contacto: amelro@fe.up.pt
Nº de páginas: 11
Documentos
Não foi encontrado nenhum documento associado à publicação com acesso permitido.
Publicações Relacionadas

Das mesmas áreas científicas

Generation of random distribution of fibres in long-fibre reinforced composites (2008)
Artigo em Revista Científica Internacional
A. R. Melro; P. P. Camanho; S. T. Pinho

Da mesma revista

eXtended Finite Element Method for fracture characterization of adhesive joints in pure mode I (2011)
Artigo em Revista Científica Internacional
Campilho, RDSG; Banea, MD; Chaves, FJP; da Silva, LFM
Development of magnetoresistive shielded heads simulation techniques using conformal mapping (2000)
Artigo em Revista Científica Internacional
Baptista, Manuel A V; Araújo, João Pedro; Sousa, João Bessa; Freitas, P. P. P Peixeiro
A dynamic spring element model for the prediction of longitudinal failure of polymer composites (2019)
Artigo em Revista Científica Internacional
Tavares, RP; Otero, F; Baiges, J; Turon, A; Camanho, PP
Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Direito da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-09-07 às 02:45:15 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias