Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Versatile Seebeck and electrical resistivity measurement setup for thin films

Publicações

Versatile Seebeck and electrical resistivity measurement setup for thin films

Título
Versatile Seebeck and electrical resistivity measurement setup for thin films
Tipo
Artigo em Revista Científica Internacional
Ano
2021
Autores
Ferreira Teixeira, S
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
F.C. Carpinteiro
(Autor)
FCUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
araujo, j. p.
(Autor)
FCUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
Sousa, JB
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Revista
Vol. 92
ISSN: 0034-6748
Outras Informações
ID Authenticus: P-00T-S3P
Abstract (EN): A custom setup for Seebeck coefficient and electrical resistivity measurements of thin films as a function of temperature in the range of 10-300 K was developed. The Seebeck coefficient is measured using a two-probe arrangement and using either a dynamical or steady/quasi-steady differential method. The temperature differences (Delta Ts) for these measurements across the samples are achieved by using resistive heaters embedded in two copper blocks. The sample is screwed to these blocks and is in pressured contact with the measurement probes. The electrical resistivity is measured with a two-probe arrangement. To verify the reliability of the developed setup, measurement tests were performed on commercial niobium foil and a specular spin valve previously studied, having obtained a great accordance (within similar to 3%) between this setup's experimental results and the reference measurements.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 6
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Da mesma revista

Versatile, high sensitivity, and automatized angular dependent vectorial Kerr magnetometer for the analysis of nanostructured materials (2011)
Artigo em Revista Científica Internacional
teixeira, j. m.; lusche, r.; ventura, j.; fermento, r.; carpinteiro, f.; araujo, j. p.; sousa, j. b.; cardoso, s.; freitas, p. p.
Two fast VME transient recorder systems with 12 bits and multiple differential inputs (1999)
Artigo em Revista Científica Internacional
Correia, C; Combo, A; Correia, M; Simoes, JB; Coelho, P; Carvalho, BB; Sousa, J; Varandas, CAF
Transversal load measurement based on twisted optical fibers (2005)
Artigo em Revista Científica Internacional
Pinto, NMP; Frazao, O; Baptista, JM; Santos, JL
Self-referencing resonant fiber optic intensity sensor based on a Mach-Zehnder topology (1996)
Artigo em Revista Científica Internacional
Baptista, JM; Cavaleiro, PM; Santos, JL
PCI data acquisition and signal processing hardware modules for long pulse operation (2004)
Artigo em Revista Científica Internacional
Sousa, J; Batista, AJN; Combo, A; Pereira, R; Correia, M; Cruz, N; Carvalho, P; Correia, C; Varandas, CAF

Ver todas (16)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Direito da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-09-08 às 04:37:30 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias