Numerical developments on the E-Motions wave energy converter: Hull design, power take-off tuning and mooring system configuration

• Tipo: Artigo em Revista Científica Internacional
• Data: 2023-07-15

Autores

Daniel Clemente (Autor) FEUP; Paulo Rosa Santos (Autor) FEUP; Francisco Taveira Pinto (Autor) FEUP

Revista

Título: Ocean Engineering

Vol. 280 Nº 114596

Páginas: 1-21

ISSN: 0029-8018

Editora: Elsevier

Indexação

ISI Web of Knowledge - 0 Citações

ISI Web of Science

Scopus - 0 Citações

Classificação Científica

FOS: Ciências da engenharia e tecnologias

CORDIS: Ciências Tecnológicas

Outras Informações

ID Authenticus: P-00Y-AH4

DOI: 10.1016/j.oceaneng.2023.114596

Abstract (EN): This paper addresses a recently conducted numerical study on the E-Motions wave energy converter, aimed at improving its energy performance and efficiency. The Potential Flow Theory-based ANSYS (R) AqwaTM software was used, being a robust industry-standard code that has been successfully applied to the E-Motions case study, in the past. Data from a preceding physical modelling campaign was applied towards calibration procedures for three platform variants - half-cylinder, half-sphere and trapezoidal prism, with and without the power take-off and subjected to regular waves. A non-dimensional root mean square error minimization approach was employed. Afterwards, the focus shifted towards defining and comparing the performance of sixteen E-Motions sub-variants, which included a new hull shape: enclosed frustum. Two additional stages were carried out: one oriented towards assessing ten power take-off mass-damping combinations and another to the study of four mooring system configurations. Results point towards a very significant hydrodynamic response, particularly within the resonance range and for the half-cylinder and half-sphere sub-variants, and maximum average power outputs of nearly 40 kW. For the best half-cylinder, half-sphere, trapezoidal prism and enclosed frustum sub-variants, the annual energy production estimates, per device, were 141, 110, 106 and 91 MWh/yr, respectively.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 21