Nanostructured pencil graphite electrodes for application as high power biocathodes in miniaturized biofuel cells and bio-batteries

• Tipo: Artigo em Revista Científica Internacional
• Data: 2020

Autores

Torrinha, A (Autor) Outra; Jiyane, N (Autor) Outra; Sabela, M (Autor) Outra; Bisetty, K (Autor) Outra; Montenegro, MCBSM (Autor) FFUP; Araujo, AN (Autor) FFUP

Revista

Título: Scientific Reports

Vol. 10

ISSN: 2045-2322

Editora: Springer Nature

Indexação

ISI Web of Knowledge - 0 Citações

Scopus - 2 Citações

Outras Informações

ID Authenticus: P-00S-T89

DOI: 10.1038/s41598-020-73635-7

Abstract (EN): This work describes a simple method for the fabrication of an enzymatic electrode with high sensitivity to oxygen and good performance when applied as biocathode. Pencil graphite electrodes (PGE) were chosen as disposable transducers given their availability and good electrochemical response. After electrochemical characterization regarding hardness and surface pre-treatment suited modification with carbon-based nanostructures, namely with reduced graphene, MWCNT and carbon black for optimal performance was proceeded. The bioelectrode was finally assembled through immobilization of bilirubin oxidase (BOx) lashed on the modified surface of MWCNT via pi-pi stacking and amide bond functionalization. The high sensitivity towards dissolved oxygen of 648 +/- 51 mu A mM(-1) cm(-2), and a LOD of 1.7 mu M, was achieved for the PGE with surface previously modified with reduced graphene (rGO), almost the double registered for direct anchorage on the bare PGE surface. Polarization curves resulted in an open circuit potential (OCP) of 1.68 V (vs Zn electrode) and generated a maximum current density of about 650 mu A cm(-2) in O-2 saturated solution.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 9