Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Optimal Transient Growth in an Incompressible Flow past a Backward-Slanted Step

Publicações

Optimal Transient Growth in an Incompressible Flow past a Backward-Slanted Step

Título
Optimal Transient Growth in an Incompressible Flow past a Backward-Slanted Step
Tipo
Artigo em Revista Científica Internacional
Ano
2019
Autores
Afonso, MM
(Autor)
FCUP
Meliga, P
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Serre, E
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Revista
A Revista está pendente de validação pelos Serviços Administrativos.
Título: FLUIDSImportada do Authenticus Pesquisar Publicações da Revista
Vol. 4
Página Final: 33
ISSN: 2311-5521
Indexação
Outras Informações
ID Authenticus: P-00Q-DYG
Abstract (EN): With the aim of providing a first step in the quest for a reduction of the aerodynamic drag on the rear-end of a car, we study the phenomena of separation and reattachment of an incompressible flow by focusing on a specific aerodynamic geometry, namely a backward-slanted step at 25 circle of inclination. The ensuing recirculation bubble provides the basis for an analytical and numerical investigation of streamwise-streak generation, lift-up effect, and turbulent-wake and Kelvin-Helmholtz instabilities. A linear stability analysis is performed, and an optimal control problem with a steady volumic forcing is tackled by means of a variational formulation, adjoint methods, penalization schemes, and an orthogonalization algorithm. Dealing with the transient growth of spanwise-periodic perturbations, and inspired by the need of physically-realizable disturbances, we finally provide a procedure attaining a kinetic-energy maximal gain on the order of 106, with respect to the power introduced by the external forcing.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 16
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Da mesma revista

Literature Review on Single and Twin-Screw Extruders Design for Polymerization Using CFD Simulation (2025)
Outra Publicação em Revista Científica Internacional
Delvar, E; Oliveira, I; Brito, MSCA; Claudia G Silva; Santamaria-Echart, A; Barreiro, MF; Ricardo J. Santos
Editorial for Special Issue "Multiscale Turbulent Transport" (2019)
Outra Publicação em Revista Científica Internacional
Afonso, MM; Sílvio Gama
Verification and Validation of openInjMoldSim, an Open-Source Solver to Model the Filling Stage of Thermoplastic Injection Molding (2020)
Artigo em Revista Científica Internacional
Pedro, J; Ramoa, B; Nobrega, JM; Fernandes, C
Using Computational Modelling to Study Extensional Rheometry Tests for Inelastic Fluids (2021)
Artigo em Revista Científica Internacional
Aali, M; Fernandes, C; Carneiro, OS; Nobrega, JM
Semi-Analytical Solutions for the Poiseuille-Couette Flow of a Generalised Phan-Thien-Tanner Fluid (2019)
Artigo em Revista Científica Internacional
Ângela M. Ribau; Luís L. Ferrás; Maria L. Morgado; Magda Rebelo; Alexandre M. Afonso

Ver todas (11)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Direito da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-09-17 às 05:57:03 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico