Development of a High Packing Fraction Detector Module with DOl Measurement Capability for High-Resolution PET

• Tipo: Artigo em Livro de Atas de Conferência Internacional
• Data: 2008

Autores

Fernando G. Almeida (Autor) FEUP; Silvio Augusto (Autor) Outra; Jose Barbosa (Autor) Outra; Ricardo Bugalho (Autor) Outra; Bruno Carriço (Autor) Outra; Claudia S. Ferreira (Autor) Outra; Miguel Ferreira (Autor) Outra; Mario Frade (Autor) Outra; Rui Moura (Autor) Outra; Philip Parkhust (Autor) Outra; Catarina Ortigao (Autor) Outra; Joao F. Pinheiro (Autor) Outra; Pedro Rodrigues (Autor) Outra; Ines Rolo (Autor) Outra; Diego N. Sa (Autor) Outra; Joaquim C. Santos (Autor) Outra; Jose C. Silva (Autor) Outra; Rui Silva (Autor) Outra; Andreia Trindade (Autor) Outra; Joao Varela (Autor) Outra

Ata de Conferência Internacional

Título: IEEE Nuclear Science Symposium Conference Record

Páginas: 3797-3800

IEEE Nuclear Science Symposium

Dresden, Germany, 19-25 October 2008

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia médica

CORDIS: Ciências Tecnológicas > Engenharia > Engenharia biomédica ; Ciências Tecnológicas > Engenharia > Engenharia de precisão ; Ciências Tecnológicas > Tecnologia > Tecnologia da instrumentação > Instrumentação médica ; Ciências Tecnológicas > Tecnologia > Tecnologia da instrumentação > Instrumentação para física ; Ciências Tecnológicas > Tecnologia > Micro-tecnologia > Micro-sistemas ; Ciências Físicas > Física > Mecânica clássica > Mecânica estrutural

Outras Informações

Abstract (EN): The Clear-PEM scanner was developed by the Portuguese PET Consortium under the framework of the Crystal Clear Collaboration for detection of early stage breast cancer. The scanner relies on a modular design in which detection modules are readout by low-noise ASICs that extract the pulse shape information for energy and timing measurements. The developed module has a dual readout, in which avalanche photodiodes arrays are used to extract the light from 20 mm long 2x2 mm2 cross section LYSO:Ce crystals, with a typical depth of interaction (DOl) resolution of 2.2 mm FWHM. The packing fraction of the module is 64%. In order to further improve the detection sensitivity of the scanner, by increasing the packing fraction while maintaining the already achieved DOl resolution, experimental work on the upgrade of the detector module was carried out. The work consisted on the exploration of arrays with 30 mm long crystals as well as the use of crystals with 2.2 x 2.2 mm2 cross section wrapped in a specular reflector, yielding a larger packing fraction, of about 78%. Energy, DOl resolution and the relative light collection were measured for polished and unpolished crystal arrays. For the polished crystal array, the variation of the photopeak position within the same matrix, was 6% r.m.s. For the 30 mm unpolished crystal array the energy resolution was 14.7% with a DOl resolution of 2.7 mm FWHM. An approach to improve the light collection efficiency is reported in which individual crystals have a mixture of different number of polished and un-polished longitudinal faces. Using crystals with two longitudinal sides polished, leaving the remaining ascut, allows extracting the DOl coordinate with a resolution of 2.8 mm FWHM, an energy resolution of 160/0 and the improvement in light collection of about 30%, in respect to the unpolished matrices. Based on these measurements a new set of detector modules were produced and characterized using the Clear-PEM frontend and data acquisition electronics. Preliminary results for the total light collection, light collection asymmetry and energy resolution are reported.

Idioma: Português

Tipo (Avaliação Docente): Científica