Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Identification of early-age concrete temperatures and strains: Monitoring and numerical simulation

Publicações

Identification of early-age concrete temperatures and strains: Monitoring and numerical simulation

Título
Identification of early-age concrete temperatures and strains: Monitoring and numerical simulation
Tipo
Artigo em Revista Científica Internacional
Ano
2009
Autores
Miguel Azenha
(Autor)
Outra
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
Denise Ferreira
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Revista
Vol. 31
Páginas: 369-378
ISSN: 0958-9465
Editora: Elsevier
Indexação
Classificação Científica
FOS: Ciências da engenharia e tecnologias > Engenharia civil
Outras Informações
ID Authenticus: P-003-HNJ
Abstract (EN): Concrete at early-ages experiences thermal deformations due to the heat generation caused by the cement hydration reactions. These deformations may lead to cracking of concrete, for which the use of numerical models in order to foresee and prevent this problem is of crucial importance. However, these numerical models must be appropriately validated by monitoring the young concrete behaviour. The conducted research regards an experimental work carried out with two main goals: (i) to evaluate the performance of different kinds of strain gages, in order to determine the more adequate ones for monitoring concrete deformations during early-ages after casting; (ii) to interpret the experimental measurements of temperatures and strains in concrete, by using a numerical model. Two different vibrating wire strain gages were used to measure early-age deformations in a concrete prism tested in the laboratory: one with a metallic housing and the other with a plastic one. The instant of solidarization of the sensors to concrete and the temperature sensitivity of their signals during the pre-solidarization period are key points as far as measurement of concrete early-age strains is concerned, which were examined for the present work. A thermo-mechanical numerical model was used to simulate the early-age concrete behaviour of the specimen. After a brief description of the model background, a comparison of the numerical predictions with the experimental results is made.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Contacto: rfaria@fe.up.pt
Nº de páginas: 10
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Da mesma revista

Rheological characterization of SCC mortars and pastes with changes induced by cement delivery (2011)
Artigo em Revista Científica Internacional
Sandra Nunes; Paula Milheiro Oliveira; Joana Sousa Coutinho; Joaquim Figueiras
Modelling of concrete at early ages: Application to an externally restrained slab (2006)
Artigo em Revista Científica Internacional
Faria, R; Azenha, M; Figueiras, JA
Mechanical behaviour of cementitious matrix composites (1996)
Artigo em Revista Científica Internacional
A. G. Magalhães; António Torres Marques; F. M. F. Oliveira; P. Soukatchoff
Linking fresh and durability properties of paste to SCC mortar (2014)
Artigo em Revista Científica Internacional
Helena Figueiras; Sandra Nunes; Joana Sousa Coutinho; Carmen Andrade

Ver todas (6)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Direito da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-07-30 às 05:04:55 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias