Assessment of Continuous Span Bridges through Nonlinear Static Procedures

• Tipo: Artigo em Revista Científica Internacional
• Data: 2009

Autores

Rui Pinho (Autor) Outra; Ricardo Monteiro (Autor) FEUP; Chiara Casarotti (Autor) Outra; Raimundo Delgado (Autor) FEUP

Revista

Título: Earthquake Spectra

Vol. 25 Nº 1

Páginas: 143-159

ISSN: 8755-2930

Editora: Earthquake Engineering Research Institute

Indexação

ISI Web of Knowledge - 14 Citações

ISI Web of Science

Scopus - 24 Citações

INSPEC

COMPENDEX

Classificação Científica

FOS: Ciências da engenharia e tecnologias > Engenharia civil

CORDIS: Ciências Tecnológicas > Engenharia > Engenharia civil > Engenharia estrutural

Outras Informações

ID Authenticus: P-003-ND3

DOI: 10.1193/1.3050449

Abstract (EN): Nonlinear static procedures constitute an important tool in design office application of performance-based earthquake engineering concepts, and for this reason, they have been extensively developed and promoted in the last decade or so. However, these efforts focused predominantly on the assessment of buildings, rather than bridges, and hence there is currently a need to verify the validity in the application of such pushover-based methods for the assessment of bridges or viaducts. In this work, therefore, by considering a wide set of bridge configurations subjected to equally varying seismic input intensity levels, four commonly employed nonlinear static procedures (CSM, N2, MPA, ACSM) are scrutinized and compared, with a view to establish their adequacy for the seismic assessment of existing continuous span bridges. Results seem to indicate that all methods are able to predict displacement response with good accuracy, while force estimation, on the other hand, is reasonably attained only by those approaches where higher modes effects are explicitly accounted for.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 17