Adsorption of natural dyes on clay fixed on polymers

• Tipo: Artigo em Revista Científica Internacional
• Data: 2005

Autores

Toni Lopes (Autor) FEUP; Odinei Gonçalves (Autor) Outra; Ricardo Barros (Autor) Outra; Francine Capelli (Autor) Outra; Ricardo Machado (Autor) Outra; Mara Quadri (Autor) Outra; Marintho Quadri (Autor) Outra

Revista

Título: Brazilian Archives of Biology and Technology

Vol. 48

Páginas: 275-280

ISSN: 1516-8913

Editora: Instituto de Tecnologia do Paraná

Classificação Científica

CORDIS: Ciências Tecnológicas > Engenharia > Engenharia química

Outras Informações

Abstract (EN): The main purpose of this work was to produce a pellet to minimize undesirable effects in fixed beds, such as colmatation, through clay fixation on the surface of polymeric particles. Preliminary experiments were carried out by heating the clay, namely Tonsil Terrana 580FF, in order to observe variations on its capacity to adsorb anthocyanins derived from red cabbage. Clays was fixed on five samples of high density polyethylene (HDPE) at 180°C -210°C for two hours. The morphological analyses of the resulting particles were accomplished through Scanning Electron Microscopy (SEM). The experiments demonstrated an increase on clay's adsorptive capacity of 15.65% at 120°C for 30 hours and 16.80% at 170°C for two hours. The SEM analysis showed that the clay particles adhered on the external surface of the pellets .These results show that it is possible to obtain polymeric pellets using HDPE coated with clay.

Idioma: Português

Tipo (Avaliação Docente): Científica