Modeling of Electrohydrodynamic (EHD) Plasma Thrusters: Optimization of Physical and Geometrical Parameters

• Tipo: Artigo em Revista Científica Internacional
• Data: 2022-02-04

Autores

Eduardo M. Calvo (Autor) FEUP; Mário J. Pinheiro (Autor) Outra; Paulo Araújo Sá (Autor) FEUP

Revista

Título: Applied Sciences

Vol. 12 Nº 3

Páginas: 1-14

Editora: MDPI

Projetos Associados

CEFT - Financiamento Plurianual 2020-2023 da Unidade de I&D CEFT - Centro de Estudos de Fenómenos de Transporte

Outras Informações

DOI: 10.3390/app12031637

Abstract (EN): This work aims to optimize a previous self-consistent model of a single stage electrohydrodynamic (EHD) thruster for space applications. The investigated parameters were the thruster performance (propulsion force T, the thrust to power ratio T/P, the electric potential distribution, the spatial distribution for the electrons and ions, and the laminar flow velocity) under several conditions, such as the design features related to the cathode's cylindrical geometry (height and radius) and some electric parameters such as the ballast resistor, and the applied potential voltage. In addition, we examined the influence of the secondary electron emission coefficient on the plasma propellant parameters. The anode to cathode potential voltage ranges between 0.9 and 40 kV, and the ballast resistance varies between 500 and 2500 M. Argon and xenon are the working gases. We assumed the gas temperature and pressure constant, 300 K and 1.3 kPa (10 Torr), respectively. The optimal matching for Xe brings off a thrust of 3.80 mu N and an efficiency T/P = 434 mN/kW, while for Ar, T = 2.75 mu N, and thruster to the power of 295 mN/kW. To our knowledge, the missing data in technical literature does not allow the verification and validation (V&V) of our numerical model.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 14