Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Austenite / ferrite isothermal reaction in a 0.4% Mn spheroidal graphite iron

Publicações

Austenite / ferrite isothermal reaction in a 0.4% Mn spheroidal graphite iron

Título
Austenite / ferrite isothermal reaction in a 0.4% Mn spheroidal graphite iron
Tipo
Artigo em Revista Científica Internacional
Ano
2003
Autores
Alain Hazotte
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Henrique Santos
(Autor)
FEUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
Jacques Lacaze
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Revista
Vol. 16 1-3
Páginas: 155-160
ISSN: 1364-0461
Editora: Taylor & Francis
Outras Informações
Resumo (PT):
Abstract (EN): A 0.4 wt % Mn ductile iron was austenitised at 950°C and isothermally transformed in the ferritic domain at 765, 755, 745 and 735 °C. The kinetics of austenite decomposition has been determined for each selected temperature by means of dilatometry. Additional observations have been made through optical and electronic microscopy. The transformation at 765 °C was found to be particularly slow, requiring more than one day to be completed. At the other temperatures tested, four hours were found enough to achieve austenite decomposition. For the alloy studied, results showed that stable austenite decomposition into ferrite and graphite is interrupted by the formation of carbides, even for the highest selected temperature which is only 10 °C below the lower limit of the three phase field austenite/ferrite/graphite. Particular attention has been paid to the beginning of ferrite growth at 765 °C. Ferrite was observed to nucleate systematically at the graphite/austenite interface, and it was observed that growth of ferrite proceeds to a significant extent before graphite nodules are totally surrounded with a ferrite shell. At lower temperatures, i.e. higher undercooling, it is expected the formation of a ferrite halo occurs soon in the transformation process. Carbide precipitation was evidenced in inter-cellular austenitic zones which are certainly associated with low Si and high Mn contents. These results have been analysed in terms of a competition between volume diffusion of carbon through the growing ferrite shell or rejection of carbon in the austenite close to the transformation front.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 6
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Dos mesmos autores

Carbon diffusion and compatibility stresses generated by temperature cycling of spheroidal graphite cast irons in the austenitic field (2003)
Artigo em Revista Científica Internacional
Rui J. C. Silva; Alain Hazotte; Henrique Santos; Ana Pinto; Jacques Lacaze; Francisco M. Braz Fernandes; Fatah Hellal
Carbon diffusion and compatibility stresses generated by temperature cycling of spheroidal graphite cast irons in the austenitic field (2002)
Artigo em Livro de Atas de Conferência Internacional
Rui J. C. Silva; Alain Hazotte; Henrique Santos; Ana Pinto; Jacques Lacaze; Francisco M. Braz Fernandes; Fatah Hellal
Austenite/ferrite isothermal reaction in a 0.4% Mn spheroidal graphite iron (2002)
Artigo em Livro de Atas de Conferência Internacional
Alain Hazotte; Henrique Santos; Jacques Lacaze

Da mesma revista

Potential use of continuous cooling curves for the prediction of solidification structure of nodular iron casting sections (1999)
Artigo em Revista Científica Internacional
Luís Filipe Malheiros; Carlos Silva Ribeiro
Potential use of continuous cooling curves for prediction of solidification structure of nodular iron casting sections (1999)
Artigo em Revista Científica Internacional
Luís Filipe Malheiros; Carlos Silva Ribeiro
New approach to the use of thermal analysis to predict microstructure and mechanical properties of as-cast ductile iron (2003)
Artigo em Revista Científica Internacional
Carlos Silva Ribeiro; C. A. Silva Ribeiro; Wolfgang Baumgart; Fernando Vilela; Christian Henke
Model for prediction of shrinkage defects in long and short freezing range materials (2007)
Artigo em Revista Científica Internacional
Reis, A; Xu, ZA; Tol, RV; Houbaert, Y; Duarte, JF; Santos, AD; Magalhaes, AB

Ver todas (13)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Direito da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-09-24 às 12:54:42 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico