Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Fatigue crack growth of rails for railways

Publicações

Fatigue crack growth of rails for railways

Título
Fatigue crack growth of rails for railways
Tipo
Artigo em Livro de Atas de Conferência Nacional
Ano
2002
Autores
Lucas Filipe Martins da Silva
(Autor)
FEUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
Fernando Manuel Fernandes de Oliveira
(Autor)
FEUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Sem AUTHENTICUS Sem ORCID
Paulo Manuel Salgado Tavares de Castro
(Autor)
FEUP
D. J. Stewardson
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Ata de Conferência Nacional
Páginas: 1-15
8' Jornadas de Fractura
Vila Real, 20-22 de Fevereiro de 2002
Indexação
Publicação em ISI Web of Science ISI Web of Science
Classificação Científica
FOS: Ciências da engenharia e tecnologias > Engenharia mecânica
CORDIS: Ciências Tecnológicas > Engenharia > Engenharia mecânica
Outras Informações
Abstract (EN): Fatigue crack growth rates of rails from four European rail manufacturers are presented. The tests performed, on which the present paper is based, are part of the contribution to a project on the fatigue crack growth rate qualifying criteria of rails for railwaysÐSMT4-CT98-2240Ðpartfunded by the European Union. Six different laboratories were involved in measuring the scatter in fatigue crack growth rates. The tests were carried out under a stress ratio of 0.5, with test temperature and relative humidity recorded but not controlled beyond the ambient laboratory condition. The cyclic test frequency was either 10 or 15 Hz. The crack length was measured manually (optical microscope) which requires interruptions to the test overnight. Statistical analysis revealed that interruptions to tests may cause interference with the results. The data were analysed by three procedures: formal methods used were the secant method and the seven-point incremental polynomial technique; in addition, statistical analysis of a more investigative type using running regressions was utilized. It was found that there was no signi®cant difference between the crack growth rate in samples from four different manufacturers.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Das mesmas áreas científicas

The influence of migrated materials on Tool wear ratio (2002)
Tese
José Duarte Ribeiro Marafona; Sem Nome; Catherine Wykes
Análise Dinâmica de Estruturas de Veículos (1985)
Tese
José António dos Santos Almacinha; Lúcia Maria Dinis

Ver todas (513)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Direito da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-09-25 às 21:03:46 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico