Influence of reinforcement type on the flexural behaviour of reinforced concrete beams

• Tipo: Artigo em Revista Científica Internacional
• Data: 2020

Autores

Stronski, P (Autor) Outra; Blazejewski, W (Autor) Outra; Socha, T (Autor) Outra; Denisiewicz, A (Autor) Outra; Kula, K (Autor) Outra; Lesiuk, G (Autor) Outra; Correia, JAFO (Autor) FEUP

Revista

Título: Proceedings of the Institution of Civil Engineers: Forensic Engineering

Vol. 172

Páginas: 158-166

ISSN: 2043-9903

Editora: ICE Publishing Ltd.

Indexação

ISI Web of Knowledge - 1 Citação

Scopus - 7 Citações

Outras Informações

ID Authenticus: P-00S-V2D

DOI: 10.1680/jfoen.20.00009

Abstract (EN): This paper presents the results of comparative strength tests on reinforced concrete beams with two different types of reinforcement. The test beams had glass-fibre-reinforced-polymer reinforcing bars with transversal stirrups, while the control beams used conventional steel reinforcement. Both groups were prepared with appropriate geometric parameters and dimensions to enable meaningful comparison. The research was based on the standards, technical approvals, recommendations and strength data of manufacturers. A four-point bending strength test was performed after 28?d to determine the stiffness and bending load capacity of the beams. The class of concrete prepared on cubic cubes was also determined to confirm the design assumptions. The obtained measurements were used to assess the suitability of individual material combinations for practical applications.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 9