Emissivity of Building Materials for Infrared Measurements

• Tipo: Artigo em Revista Científica Internacional
• Data: 2021

Autores

Eva Barreira (Autor) FEUP; Ricardo M. S. F. Almeida (Autor) Outra; Maria de Lurdes Simões (Autor) FEUP

Revista

Título: Sensors

Vol. 21 Nº 6

Páginas: 1-13

ISSN: 1424-3210

Editora: MDPI

Indexação

ISI Web of Knowledge - 2 Citações

Scopus - 1 Citação

Outras Informações

ID Authenticus: P-00T-KDJ

DOI: 10.3390/s21061961

Abstract (EN): Infrared thermography (IRT) is a technique increasingly used in building inspection. If in many applications it is sufficient to analyze the thermal patterns, others exist in which the exact determination of the surface temperature is a fundamental aspect. In these circumstances, the emissivity of the surfaces assumes special relevance, being probably the most important property in the definition of the boundary conditions. However, information on the uncertainty involved in its measurement, as well as the conditions that influence it, is scarce. This article presents an innovative contribution both to the characterization of the emissivity of various construction materials, and to the discussion of emissivity measurement procedures and the attendant uncertainty. In this sense, three experimental campaigns were carried out: T.I, preliminary tests to assess the initial conditions required for an accurate IRT measurement of the emissivity (reference tape and position of the camera); T.II, assessment of the emissivity of nine different building materials, in dry conditions, using the emissometer and the IRT and black tape methods; and T.III, assessment of the emissivity of three materials during the drying process. The results confirmed that emissivity is a crucial parameter for the accurate measurement of surface temperature. Emissivity measurements carried out with IRT (black tape method) and with the emissometer returned meaningful differences when compared with the values available in the literature. This disagreement led to surface temperature differences of up to 7 degrees C (emissometer versus reference values). This research also highlighted that the moisture content of the materials influences the emissivity values, with fluctuations that can be greater than 10%, and that the effect of moisture is visible even for low values of moisture content.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 13