Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Meander-Line Monopole Antenna With Compact Ground Plane for a Bluetooth System-in-Package

Publicações

Meander-Line Monopole Antenna With Compact Ground Plane for a Bluetooth System-in-Package

Título
Meander-Line Monopole Antenna With Compact Ground Plane for a Bluetooth System-in-Package
Tipo
Artigo em Revista Científica Internacional
Ano
2019
Autores
Pedro Pinho
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Rui Pedro Silva
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Márcio Pinheiro
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Henrique Salgado
(Autor)
FEUP
Hugo M. Santos
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Ver página do Authenticus Sem ORCID
Revista
Vol. 18 11
Páginas: 2379-2383
ISSN: 1536-1225
Editora: IEEE
Outras Informações
ID Authenticus: P-00R-BZA
Abstract (EN): In this letter, a packaged compact meander-line monopole antenna for Bluetooth communications, manufactured in low-density fan-out technology, is presented. A combined size for the antenna and ground plane of 0.1 lambda(0) x 0.06 lambda(0) x 0.008 lambda(0) is obtained. Such small antennas are usually designed considering their connection to an evaluation board with a large ground plane, which improves their gain and bandwidth, but in this letter, the antenna is designed so it can work standalone without any further connection to printed circuit boards. The challenge of designing such a compact antenna is surpassed by performing a detailed modeling of the radiating meander-line element altogether with its finite ground plane, a tuning inductor, and an inductive coupling feed. The antenna model is developed in Ansys HFSS using the finite element method, which is later validated experimentally. Measurements of the return loss radiation pattern are carried out, and final results show a -6 dB bandwidth of approximately 110 MHz and a gain of -8.7 dBi, at 2.42 GHz.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 5
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Da mesma revista

Compact Printed Monopole Antenna With Chip Inductor for WLAN (2011)
Artigo em Revista Científica Internacional
Q. Luo; J. R. Pereira; H. M. Salgado
Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Direito da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-10-16 às 18:18:38 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico