Effect of secondary crystal orientations on the deformation anisotropy for nickel-based single-crystal plate with notch feature

• Tipo: Artigo em Revista Científica Internacional
• Data: 2019

Autores

Yu Zhai (Autor) Outra; Muhammad Kashif Khan (Autor) Outra; José Correia (Autor) FEUP; Abílio M. P. de Jesus (Autor) FEUP; Zhiyong Huang (Autor) Outra; Xu Zhang (Autor) Outra; Qingyuan Wang (Autor) Outra

Revista

Título: Journal of Strain Analysis for Engineering Design

Vol. 54 Nº 1

Páginas: 54-64

ISSN: 0309-3247

Editora: SAGE

Indexação

ISI Web of Knowledge - 0 Citações

ISI Web of Science

Scopus - 1 Citação

INSPEC

Outras Informações

ID Authenticus: P-00Q-30V

DOI: 10.1177/0309324718819298

Abstract (EN): The effects of the secondary crystal orientations on the nickel-based single-crystal superalloy turbine blades were investigated. The stress concentration features were used for investigation of the optimal secondary crystal orientation leading to the higher strength of the single-crystal turbine blades. The crystal plastic finite element method coupled with micromechanics constitutive model is applied to study the effect of secondary crystal orientation on plastic deformation and mechanical behavior around the cooling holes and notches with the primary (load) orientation fixed at [001] direction. For nickel-based superalloy plates with holes or notches, the secondary crystal orientation effect on the strength needs to be clarified at various load levels. The maximum von Mises stress in the single-crystal alloy varies significantly with variation in the secondary crystal orientations. It was found that only two slip systems dominate the deformation process of the material owing to their favorable orientation with loading. The secondary orientation of 45 degrees was identified with lowest resolved shear stress in the dominating slip systems and potential of producing higher strength for single-crystal turbine blades.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 11