Using the finite element method and radial point interpolation method to analyze the jaw bone

• Tipo: Artigo em Livro de Atas de Conferência Internacional
• Data: 2019

Autores

M. B. F. Moutinho (Autor) Outra; Jorge Belinha (Autor) Outra; Renato Natal Jorge (Autor) FEUP

Ata de Conferência Internacional

Título: 6th IEEE Portuguese Meeting on Bioengineering, ENBENG 2019 - Proceedings

Páginas: 1-4

6th IEEE Portuguese Meeting on Bioengineering, ENBENG 2019

22 February 2019 through 23 February 2019

Indexação

ISI Web of Knowledge - 0 Citações

Scopus - 0 Citações

Outras Informações

ID Authenticus: P-00Q-K15

DOI: 10.1109/enbeng.2019.8692537

Abstract (EN): Objective: The purpose of this study is to perform an elastic analysis of the jaw considering distinct external loads. Methods: This article describes the steps required to obtain the final geometric model of a jaw from CT images. Using the constructed model, the FEM and RPIM were applied with the objective of analyzing/comparing the obtained stress/strain levels. Results: It was possible to verify that the loads that are imposed in the model induce higher stress levels in the region where the loads are inserted. Also, it was possible to analyze the displacement, exercised by the model, through a comparative symmetric evaluation. Conclusion: The two methods present very similar results for the different variables under study. Nevertheless, the RPIM produces slightly higher values when compared with the FEM.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 4