Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Mode II fracture toughness of CFRP as a function of temperature and strain rate

Publicações

Mode II fracture toughness of CFRP as a function of temperature and strain rate

Título
Mode II fracture toughness of CFRP as a function of temperature and strain rate
Tipo
Artigo em Revista Científica Internacional
Ano
2017
Autores
Machado, JJM
(Autor)
Outra
Marques, EAS
(Autor)
Outra
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
Campilho, RDSG
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Ver página do Authenticus Sem ORCID
da Silva, LFM
(Autor)
FEUP
Ver página pessoal Sem permissões para visualizar e-mail institucional Pesquisar Publicações do Participante Ver página do Authenticus Sem ORCID
Revista
Vol. 114
Páginas: 311-318
ISSN: 1359-8368
Editora: Elsevier
Outras Informações
ID Authenticus: P-00N-2N2
Abstract (EN): Knowledge of the fracture properties of composite materials is fundamental to predict the impact behaviour of the lightweight structures currently used in the automotive industry. Although there is substantial research on mode I fracture behaviour of composites, limited information exists on mode II behaviour. This work aims to fulfil this gap, presenting experimental data regarding the influence of temperature and strain rate on the fracture energy in mode II, G(IIC), of composite plates. Significant influence of the strain rate and temperature on G(IIC) of the composite materials was found. Higher strain rates led to a decrease of G(IIC) up to 17%. An increase of temperature corresponded to an increase of G(IIC) up to 15% and a decrease of temperature originated a decrease of G(IIC) up to 7%.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 8
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Dos mesmos autores

Mode I fracture toughness of CFRP as a function of temperature and strain rate (2017)
Artigo em Revista Científica Internacional
Machado, JJM; Marques, EAS; Campilho, RDSG; da Silva, LFM
Geometrical optimization of adhesive joints under tensile impact loads using cohesive zone modelling (2020)
Artigo em Revista Científica Internacional
Valente, JPA; Campilho, RDSG; Marques, EAS; Machado, JJM; da Silva, LFM
Adhesive thickness effects on the mixed-mode fracture toughness of bonded joints (2020)
Artigo em Revista Científica Internacional
Oliveira, JJG; Campilho, RDSG; Silva, FJG; Marques, EAS; Machado, JJM; da Silva, LFM

Da mesma revista

Review on techniques to improve the strength of adhesive joints with composite adherends (2019)
Outra Publicação em Revista Científica Internacional
Shang, X; Marques, EAS; Machado, JJM; Ricardo Carbas; Jiang, D; da Silva, LFM
Design and optimization of self-deployable damage tolerant composite structures: A review (2021)
Outra Publicação em Revista Científica Internacional
Pedro Fernandes; Ricardo Pinto; Nuno Correia
Toughness of a brittle epoxy resin reinforced with micro cork particles: Effect of size, amount and surface treatment (2017)
Artigo em Revista Científica Internacional
Barbosa, AQ; da Silva, LFM; Abenojar, J; Miguel Figueiredo; Oechsner, A
Through-the-thickness stress profiles in laminated composite and sandwich structure plates via unified formulation (2016)
Artigo em Revista Científica Internacional
Caliri, MF; Ferreira, AJM; Tita, V

Ver todas (69)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Direito da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-09-13 às 23:59:16 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico