Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Seismic performance of composite moment-resisting frames achieved with sustainable CFST members

Publicações

Seismic performance of composite moment-resisting frames achieved with sustainable CFST members

Título
Seismic performance of composite moment-resisting frames achieved with sustainable CFST members
Tipo
Artigo em Revista Científica Internacional
Ano
2016
Autores
Silva, A
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Jiang, Y
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Macedo, L
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Monteiro, R
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Silvestre, N
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Revista
Vol. 10
Páginas: 312-332
ISSN: 2095-2430
Editora: Springer Nature
Outras Informações
ID Authenticus: P-00K-T4Y
Abstract (EN): The main objective of the research presented in this paper is to study the bending behaviour of Concrete Filled Steel Tube (CFST) columns made with Rubberized Concrete (RuC), and to assess the seismic performance of moment-resisting frames with these structural members. The paper describes an experimental campaign where a total of 36 specimens were tested, resorting to a novel testing setup, aimed at reducing both the preparation time and cost of the test specimens. Different geometrical and material parameters were considered, namely cross-section type, cross-section slenderness, aggregate replacement ratio, axial load level and lateral loading type. The members were tested under both monotonic and cyclic lateral loading, with different levels of applied axial loading. The test results show that the bending behaviour of CFST elements is highly dependent on the steel tube properties and that the type of infill does not have a significant influence on the flexural behaviour of the member. It is also found that Eurocode 4 is conservative in predicting the flexural capacity of the tested specimens. Additionally, it was found that the seismic design of composite momentresisting frames with CFST columns, according to Eurocode 8, not only leads to lighter design solutions but also to enhanced seismic performance in comparison to steel frames.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 21
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Da mesma revista

Seismic fragility assessment of revised MRT buildings considering typical construction changes (2020)
Artigo em Revista Científica Internacional
Rakesh Dumaru; Hugo Rodrigues; Humberto Varum
Mechanical properties characterization of different types of masonry infill walls (2020)
Artigo em Revista Científica Internacional
André Furtado; Rodrigues, H; António Arêde; Humberto Varum
Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Direito da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-09-03 às 21:18:01 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias