Experimental characterization of the out-of-plane performance of regular stone masonry walls, including test setups and axial load influence

• Tipo: Artigo em Revista Científica Internacional
• Data: 2015

Autores

Tiago Miguel Ferreira (Autor) Outra; Alexandre A. Costa (Autor) Outra; António Arêde (Autor) FEUP; Ana Gomes (Autor) FEUP; Aníbal Costa (Autor) Outra

Revista

Título: Bulletin of Earthquake Engineering

Vol. 13

Páginas: 2667-2692

ISSN: 1570-761X

Editora: Springer Nature

Indexação

ISI Web of Knowledge - 17 Citações

Scopus - 23 Citações

INSPEC

Classificação Científica

CORDIS: Ciências Tecnológicas > Engenharia > Engenharia civil > Engenharia estrutural

FOS: Ciências da engenharia e tecnologias > Engenharia civil

Outras Informações

ID Authenticus: P-00G-1VP

DOI: 10.1007/s10518-015-9742-1

Abstract (EN): Stone masonry is one of the oldest and most worldwide used building techniques. Nevertheless, the structural response of masonry structures is complex and the effective knowledge about their mechanical behaviour is still limited. This fact is particularly notorious when dealing with the description of their out-of-plane behaviour under horizontal loadings, as is the case of the earthquake action. In this context, this paper describes an experimental program, conducted in laboratory environment, aiming at characterizing the out-of-plane behaviour of traditional unreinforced stone masonry walls. In the scope of this campaign, six full-scale sacco stone masonry specimens were fully characterised regarding their most important mechanic, geometric and dynamic features and were tested resorting to two different loading techniques under three distinct vertical pre-compression states; three of the specimens were subjected to an out-of-plane surface load by means of a system of airbags and the remaining were subjected to an out-of-plane horizontal line-load at the top. From the experiments it was possible to observe that both test setups were able to globally mobilize the out-of-plane response of the walls, which presented substantial displacement capacity, with ratios of ultimate displacement to the wall thickness ranging between 26 and 45 %, as well as good energy dissipation capacity. Finally, very interesting results were also obtained from a simple analytical model used herein to compute a set of experimental-based ratios, namely between the maximum stability displacement and the wall thickness for which a mean value of about 60 % was found.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 26