Investigation of the Characteristics of the Portuguese Moment-Frame RC Building Stock

• Tipo: Artigo em Livro de Atas de Conferência Internacional
• Data: 2014

Autores

Silva, V (Autor) Outra; Crowley, H (Autor) Outra; Varum, H (Autor) FEUP; Pinho, R (Autor) Outra; Marques, M (Autor) Outra

Ata de Conferência Internacional

Título: Vulnerability, Uncertainty, and Risk: Quantification, Mitigation, and Management - Proceedings of the 2nd International Conference on Vulnerability and Risk Analysis and Management, ICVRAM 2014 and the 6th International Symposium on Uncertainty Modeling and Analysis, ISUMA 2014

Páginas: 1726-1735

2nd International Conference on Vulnerability and Risk Analysis and Management, ICVRAM 2014 and the 6th International Symposium on Uncertainty Modeling and Analysis, ISUMA 2014

13 July 2014 through 16 July 2014

Indexação

ISI Web of Knowledge

Scopus - 2 Citações

Outras Informações

ID Authenticus: P-00G-CX9

DOI: 10.1061/9780784413609.173

Abstract (EN): The computation of fragility models can be carried out using post-earthquake damage data or through the development of numerical models capable of reliably representing the structural behaviour of a given building typology when subjected to a set of ground motion records. In Portugal, due to the lack of data regarding ground-shaking damage, analytical methodologies are often followed to evaluate the structural vulnerability of the existing building stock. However, these methodologies require advanced knowledge about the geometric and material characteristics of the building typologies, which is often not available or is poorly characterized. In this study, the material and geometric properties of the RC buildings, which represent approximately 50% of the Portuguese building stock, were thoroughly analysed. In order to do so, 400 drawings and design specifications from real buildings were gathered throughout the country, in cooperation with private practitioners, design offices and public institutions. For each building drawing, the main frames in the structure that would resist eventual lateral loads were chosen in order to measure the following set of geometric parameters: ground story and upper storys heights, column widths and depths, beam lengths, widths and depths, and slab thicknesses. The distribution of each geometric property was modelled considering several probabilistic distributions (normal, lognormal, exponential, gamma, beta), and their statistical parameters were derived using the maximum likelihood approach. These results can be used for numerical analysis, thus allowing a better understanding of the physical vulnerability of the RC building stock in Portugal. © 2014 American Society of Civil Engineers.

Idioma: Inglês

Tipo (Avaliação Docente): Científica