Assessment of AOPs as a polishing step in the decolourisation of bio-treated textile wastewater: Technical and economic considerations

• Tipo: Artigo em Revista Científica Internacional
• Data: 2016

Autores

Petrick A. Soares (Autor) FEUP; Tânia F. C. V. Silva (Autor) FEUP; Adriana Ramos Arcy (Autor) Outra; Selene M. A. Guelli U. Souza (Autor) Outra; Rui A. R. Boaventura (Autor) FEUP; Vítor J. P. Vilar (Autor) FEUP

Revista

Título: Journal of Photochemistry and Photobiology A: Chemistry

Vol. 317

Páginas: 26-38

ISSN: 1010-6030

Editora: Elsevier

Indexação

ISI Proceedings

ISI Web of Knowledge - 12 Citações

Scopus - 25 Citações

Classificação Científica

CORDIS: Ciências Tecnológicas > Tecnologia > Tecnologia ambiental

FOS: Ciências da engenharia e tecnologias > Engenharia do ambiente

Projetos Associados

LSRE/LCM LA - RL1_P3 - Environmental Technologies

LSRE-LCM - Laboratório de Processos de Separação e Reação - Laboratório de Catálise e Materiais

Outras Informações

ID Authenticus: P-00K-0X6

DOI: 10.1016/j.jphotochem.2015.10.017

Abstract (EN): Biological oxidation processes have shown good results for the mineralisation of the non-recalcitrant fraction of textile wastewater. However, they do not always represent a feasible technique for colour removal, requiring a polishing step for decolourisation before the wastewater can be discharged into a receiving water body. In this study, UVC/H2O2 and photo-Fenton (PF) oxidation processes were used as a polishing step in the decolourisation of a bio-treated real textile wastewater. The photolysis of hydrogen peroxide using UVC radiation showed decolourisation efficiencies of 86% (Pt-Co method) and 96% (DFZ(436 nm)), consuming 1.6 mM H2O2 after 0.9 KJ(UV) L-1 (time = 35 min; UVC lamp power = 6 W; natural pH 7.8; T = 30 degrees C). The PF reaction was promoted by different radiation sources (UVC, UVA or UVA-vis), showing best results under UVC light. The efficiency of the UVC/Fe2+/H2O2 system was also studied for different iron concentrations, H2O2 availability and pH values. Decolourisation efficiencies of 78% (Pt-Co method) and 93% (DFZ(436 nm)) were achieved applying the UVC/Fe/H2O2 system at pH 2.8 and T = 30 degrees C, consuming 3.6 mM H2O2 after 0.6 KJ(UV) L-1 (time = 25 min; UV lamp power = 6 W). To further investigate the use of solar energy, additional PF assays mediated by ferric-organic ligands under UVA-vis radiation were also performed, considering the effect of the type of ferric-organic ligand as well as the iron/ferric-organic ligand molar ratio, iron concentration and pH. Maximum values for the decolourisation with UVA-vis/Fe3+/H2O2/oxalic acid were 84% (Pt-Co method) and 94% (DFZ(436 nm)), consuming 1.9 mM H2O2 after 2.9 KJ(UV) L-1 (pH 2.8). In addition, the costs associated with the processes studied were estimated. For the optimal conditions, aiming at achieving the legal wastewater discharge requirements, the total unit costs were: (a) 0.25 (sic)m(-3) (UVC/H2O2 at pH 2.8); (b) 0.16 (sic)m(-3) (UVC/H2O2 at natural pH); (c) 0.24 (sic)m(-3) (UVC/Fe2+/H2O2 at pH 2.8); (d) 0.61 (sic)m(-3) (UVA-vis/Fe2+/H2O2 at pH 2.8); (e) 0.79 (sic)m(-3) (UVA-vis/Fe3+/H2O2/oxalic acid at pH 2.8) and; (f) 0.83 (sic)m(-3) (UVA-vis/Fe3+/H2O2/oxalic acid at pH 5.0).

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 13