Publicações

Physical characterization and compression tests of one leaf stone masonry walls

Almeida, C (Autor) (Outra); Paulo Guedes, JP (Autor) (FEUP); Arede, A (Autor) (FEUP); Costa, CQ (Autor) (Outra); Costa, A (Autor) (FEUP)

2012

Out-of-plane behavior of masonry infilled RC frames based on the experimental tests available: A systematic review

Furtado, A (Autor) (Outra); Rodrigues, H (Autor) (Outra); António Arêde (Autor) (FEUP); Humberto Varum (Autor) (FEUP)

2018

Mortar with wood waste ash: Mechanical strength carbonation resistance and ASR expansion

Telma Ramos (Autor) (Outra); Ana Mafalda Matos (Autor) (Outra); Joana Sousa Coutinho (Autor) (FEUP)

2013

Mechanical properties of adobe masonry for the rehabilitation of buildings

Sanchez, A (Autor) (Outra); Humberto Varum (Autor) (FEUP); Martins, T (Autor) (Outra); Fernandez, J (Autor) (Outra)

2022

Drying index for in-service physical performance assessment of renders

Flores Colen, I (Autor) (Outra); Silva, L (Autor) (Outra); de Brito, J (Autor) (Outra); Vasco Peixoto De Freitas (Autor) (FEUP)

2016

Alkali-silica reaction in concrete: Mechanisms, mitigation and test methods

Figueira, RB (Autor) (Outra); Sousa, R (Autor) (Outra); Coelho, L (Autor) (FCUP); Azenha, M (Autor) (Outra); de Almeida, JMMM (Autor) (FCUP); Jorge, PAS (Autor) (FCUP); Silva, CJR (Autor) (Outra)

2019

3D printing lightweight mortars with cork to improve thermal efficiency in buildings

Artigo em Revista Científica Internacional

Ana Sofia Guimarães (Autor) (FEUP); Carolina Rangel (Autor) (Outra); Theo Salet (Autor) (Outra); Sandra Lucas (Autor) (Outra)

2024

Documentos

Topology optimisation of masonry units from the thermal point of view using a genetic algorithm

Luísa C. Sousa (Autor) (FEUP); Catarina F. Castro (Autor) (FEUP); Carlos C. António (Autor) (FEUP); Hipólito Sousa (Autor) (FEUP)

2011

Thermography as a technique for monitoring early age temperatures of hardening concrete

Miguel Azenha (Autor) (Outra); Rui Faria (Autor) (FEUP); Helena Figueiras (Autor) (Outra)

2011

Thermo-chemo-hygro-mechanical simulation of the restrained shrinkage ring test for cement-based materials under distinct drying conditions

Fragkoulis Kanavaris (Autor) (Outra); Cláudio Ferreira (Autor) (Outra); Carlos Sousa (Autor) (FEUP); Miguel Azenha (Autor) (Outra)

2021

Indexação Documentos

Thermal mortar-based insulation for historic walls: An extensive hygrothermal characterization of material systems

Vasco Peixoto De Freitas (Autor) (FEUP); Magda Posani (Autor) (Outra)

2021

Documentos

Textile waste as an alternative thermal insulation building material solution

Ana Briga Sa (Autor) (Outra); David Nascimento (Autor) (Outra); Nuno Teixeira (Autor) (Outra); Jorge Pinto (Autor) (Outra); Fernando Caldeira (Autor) (Outra); Humberto Varum (Autor) (FEUP); Anabela Paiva (Autor) (Outra)

2013

Sustainable waste recycling solution for the glass fibre reinforced polymer composite materials industry

A.C. Meira Castro (Autor) (Outra); M. C. S. Ribeiro (Autor) (Outra); J. Santos (Autor) (Outra); J. P. Meixedo (Autor) (Outra); F. J. G. Silva (Autor) (Outra); A. Fiúza (Autor) (FEUP); M. L. Dinis (Autor) (FEUP); M. R. Alvim (Autor) (Outra)

2013

Structural performance of unreinforced masonry elements made with concrete and horizontally perforated ceramic blocks - Laboratory tests

Ana Sofia Guimarães (Autor) (FEUP); J.M.P.Q. Delgado (Autor) (Outra); António Azevedo (Autor) (Outra); Ricardo Oliveira (Autor) (Outra); Fernando Artur Nogueira (Autor) (Outra); C. Pires Sobrinho (Autor) (Outra)

2018

Strengthening of structures damaged by the Azores earthquake of 1998

Aníbal Costa (Autor) (Outra); António Arêde (Autor) (FEUP)

2006