Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Simulation of failure in laminated polymer composites: Building-block validation

Publicações

Simulation of failure in laminated polymer composites: Building-block validation

Título
Simulation of failure in laminated polymer composites: Building-block validation
Tipo
Artigo em Revista Científica Internacional
Ano
2019
Autores
Furtado, C
(Autor)
FEUP
Catalanotti, G
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Gray, PJ
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Wardle, BL
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Camanho, PP
(Autor)
FEUP
Revista
Título: Composite StructuresImportada do Authenticus Pesquisar Publicações da Revista
Vol. 226
ISSN: 0263-8223
Editora: Elsevier
Outras Informações
ID Authenticus: P-00Q-S23
Abstract (EN): The development of numerical tools to complement the experimental determination of structural design parameters is of key importance to hasten the certification process of new materials and structures. In this work, a methodology to simulate elastic and inelastic deformation of composite laminates at the subcomponent level based on finite element analysis is proposed. A modified version of a continuum damage model proposed in the literature combined with a frictional cohesive zone model is used to capture the intralaminar and interlaminar damage and failure of composite laminates in general loading conditions. The methodology is validated for three aerospace-grade carbon fibre reinforced (epoxy) polymer composite material systems and coupon configurations with increasing level of complexity, including unnotched tension/compression, open-hole tension/compression and filled hole compression. The predictions obtained are in good agreement with the experimental results for all the test cases, oftentimes within the standard error of the tests, with a maximum relative error of 13%.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Nº de páginas: 23
Documentos
Não foi encontrado nenhum documento associado à publicação.
Publicações Relacionadas

Da mesma revista

Smart composites and composite structures In honour of the 70th anniversary of Professor Carlos Alberto Mota Soares (2016)
Outra Publicação em Revista Científica Internacional
Benjeddou, A; Araujo, AL; Carrera, E; Reddy, JN; António Torres Marques; Mota Soares, CMM
Simplified stress analysis of functionally graded single-lap joints subjected to combined thermal and mechanical loads (2018)
Outra Publicação em Revista Científica Internacional
Paroissien, E; da Silva, LFM; Lachaud, F
Reinforcement of CFRP single lap joints using metal laminates (2019)
Outra Publicação em Revista Científica Internacional
Morgado, MA; Ricardo Carbas; Marques, EAS; da Silva, LFM
Multifunctional Material Systems: A state-of-the-art review (2016)
Outra Publicação em Revista Científica Internacional
Ferreira, ADBL; Novoa, PRO; António Torres Marques

Ver todas (197)

Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Faculdade de Direito da Universidade do Porto  I Termos e Condições  I Acessibilidade  I Índice A-Z
Página gerada em: 2025-07-31 às 04:03:05 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias