Fungal degradation of lignin-based rigid polyurethane foams

• Tipo: Artigo em Revista Científica Internacional
• Data: 2012

Autores

Amaral, JS (Autor) Outra; Sepulveda, M (Autor) Outra; Cateto, CA (Autor) Outra; Fernandes, IP (Autor) Outra; Alírio Rodrigues (Autor) FEUP; Naceur Belgacem, MN (Autor) Outra; Filomena Barreiro, MF (Autor) Outra

Revista

Título: Polymer Degradation and Stability

Vol. 97

Páginas: 2069-2076

ISSN: 0141-3910

Editora: Elsevier

Indexação

ISI Web of Knowledge - 7 Citações

Scopus - 7 Citações

Outras Informações

ID Authenticus: P-002-55Q

DOI: 10.1016/j.polymdegradstab.2012.03.037

Abstract (EN): In this work, the ability of Aspergillus niger to degrade two lignin-based rigid polyurethane (RPU) foams was evaluated and compared with a control RPU foam based on a commercial polyether-polyol, Lupranol (R) 3323. The foams degradation was studied according to different procedures, namely by setting different series of batch cultures, either using liquid media or soil conditions, for 90 days at 30 degrees C. For the soil conditions, two different assays were performed, namely with and without A. niger addition. The changes in the morphology of the RPU foams were evaluated by optical (OM) and scanning electron microscopy (SEM), whereas the structural modifications were inspected by FTIR spectroscopy. After 90 days treatment, morphological changes were clearly visible at the surface (cell wall) of the two lignin-based foams indicating a stronger effect of the microorganisms' activity in these samples. FTIR spectra confirmed that the chemical structure of the polymer suffered modifications after the respirometry assays due to microorganisms attack. Comparatively to the commercial foam, it was observed that both the lignin-based foams presented a higher degradation level.

Idioma: Inglês

Tipo (Avaliação Docente): Científica

Nº de páginas: 8