Rapid automated method for on-site determination of sulfadiazine in fish farming: a stainless steel veterinary syringe coated with a selective membrane of PVC serving as a potentiometric detector in a flow-injection-analysis system

• Type: Article in International Scientific Journal
• Date: 2011

Authors

Almeida, SAA (Author) Other; Amorim, LR (Author) Other; Heitor, AH (Author) Other; Montenegro, MCBSM (Author) FFUP; Barbosa, J (Author) Other; Sa, LC (Author) Other; Sales, MGF (Author) Other

Journal

Title: Analytical and Bioanalytical Chemistry

Vol. 401

Pages: 3355-3365

ISSN: 1618-2642

Publisher: Springer Nature

Indexing

ISI Web of Knowledge - 8 Citations

Scopus - 10 Citations

Scientific classification

FOS: Natural sciences > Chemical sciences

Other information

Authenticus ID: P-002-JBP

DOI: 10.1007/s00216-011-5441-1

Abstract (EN): Sulfadiazine is an antibiotic of the sulfonamide group and is used as a veterinary drug in fish farming. Monitoring it in the tanks is fundamental to control the applied doses and avoid environmental dissemination. Pursuing this goal, we included a novel potentiometric design in a flow-injection assembly. The electrode body was a stainless steel needle veterinary syringe of 0.8-mm inner diameter. A selective membrane of PVC acted as a sensory surface. Its composition, the length of the electrode, and other flow variables were optimized. The best performance was obtained for sensors of 1.5-cm length and a membrane composition of 33% PVC, 66% o-nitrophenyloctyl ether, 1% ion exchanger, and a small amount of a cationic additive. It exhibited Nernstian slopes of 61.0 mV decade(-1) down to 1.0 x 10(-5) mol L(-1), with a limit of detection of 3.1 x 10(-6) mol L(-1) in flowing media. All necessary pH/ionic strength adjustments were performed online by merging the sample plug with a buffer carrier of 4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid, pH 4.9. The sensor exhibited the advantages of a fast response time (less than 15 s), long operational lifetime (60 days), and good selectivity for chloride, nitrite, acetate, tartrate, citrate, and ascorbate. The flow setup was successfully applied to the analysis of aquaculture waters. The analytical results were validated against those obtained with liquid chromatography-tandem mass spectrometry procedures. The sampling rate was about 84 samples per hour and recoveries ranged from 95.9 to 106.9%.

Language: English

Type (Professor's evaluation): Scientific

No. of pages: 11