Go to:
Logótipo
Você está em: Start > Publications > View > Tests and design of short steel tubes filled with rubberised concrete
Publication

Tests and design of short steel tubes filled with rubberised concrete

Title
Tests and design of short steel tubes filled with rubberised concrete
Type
Article in International Scientific Journal
Year
2016
Authors
Duarte, APC
(Author)
Other
The person does not belong to the institution. The person does not belong to the institution. The person does not belong to the institution. Without AUTHENTICUS Without ORCID
Silva, BA
(Author)
Other
The person does not belong to the institution. The person does not belong to the institution. The person does not belong to the institution. Without AUTHENTICUS Without ORCID
Silvestre, N
(Author)
Other
The person does not belong to the institution. The person does not belong to the institution. The person does not belong to the institution. Without AUTHENTICUS Without ORCID
de Brito, J
(Author)
Other
The person does not belong to the institution. The person does not belong to the institution. The person does not belong to the institution. Without AUTHENTICUS Without ORCID
Julio, E
(Author)
Other
The person does not belong to the institution. The person does not belong to the institution. The person does not belong to the institution. Without AUTHENTICUS Without ORCID
Journal
Vol. 112
Pages: 274-286
ISSN: 0141-0296
Publisher: Elsevier
Other information
Authenticus ID: P-00K-5RA
Abstract (EN): An experimental investigation on the strength and ductility of short steel tubes filled with rubberised concrete (RuC), sourced from recycled scrap tyres, is presented in this paper. Firstly, a brief literature review on (i) concrete-filled steel tubes (CFST) and (ii) mechanical characterisation of rubberised concrete is presented. Then, the experimental investigation is described and test results are shown and discussed, namely, the assessment of (i) RuC and steel mechanical properties and (ii) RuCFST column structural properties. The influence of various parameters, such as the cross-section shape (square, rectangular, circular), steel grade, and concrete mix (standard concrete versus RuC), on the short column strength and ductility is analysed and discussed. Eurocode 4 is considered (i) to determine the strength of the tested columns and, in particular, (ii) to assess its applicability to RuCFST columns based on a comparison with the experimental results. The main conclusion of this research is that RuCFST short columns present higher ductility than those made of standard concrete, even though they also show lower strength. This improved ductility is noticeable in columns with circular sections, rather than in square and rectangular sections. From a practical viewpoint, this could be a major benefit for structures in seismic areas where energy dissipation is needed.
Language: English
Type (Professor's evaluation): Scientific
No. of pages: 13
Documents
We could not find any documents associated to the publication.
Related Publications

Of the same authors

Finite element modelling of short steel tubes filled with rubberized concrete (2016)
Article in International Scientific Journal
Duarte, APC; Silva, BA; Silvestre, N; de Brito, J; Julio, E; J. M. Castro
Experimental study on short rubberized concrete-filled steel tubes under cyclic loading (2016)
Article in International Scientific Journal
Duarte, APC; Silva, BA; Silvestre, N; de Brito, J; Julio, E; J. M. Castro

Of the same journal

Reduced scale models based on similitude theory: A review up to 2015 (2016)
Another Publication in an International Scientific Journal
Coutinho, CP; Baptista, AJ; J. Dias Rodrigues
Numerical modelling of the cyclic behaviour of RC elements built with plain reinforcing bars (2011)
Another Publication in an International Scientific Journal
Jose Melo; Catarina Fernandes; Humberto Varum; Hugo Rodrigues; Anibal Costa; António Arêde
Assessment of train running safety on bridges: A literature review (2021)
Another Publication in an International Scientific Journal
Pedro Aires Montenegro; H. Carvalho; D. Ribeiro; Rui Calçada; M. Tokunaga; M. Tanabe; W. M. Zhai
3D numerical simulation of the cracking behaviour of a RC one-way slab under the combined effect of thermal, shrinkage and external loads (2020)
Article in International Scientific Journal
Gomes, J; Carvalho, R; Carlos Sousa; Granja, J; Rui Faria; Schlicke, D; Azenha, M
3D FEM analysis of the effect of buried phononic crystal barriers on vibration mitigation (2019)
Article in International Scientific Journal
Pedro Alves Costa; Carlos Albino; Luis Godinho; Paulo Amado Mendes; Daniel Dias da Costa; Delfim Soares Júnior

See all (129)

Recommend this page Top
Copyright 1996-2024 © Faculdade de Arquitectura da Universidade do Porto  I Terms and Conditions  I Acessibility  I Index A-Z  I Guest Book
Page created on: 2024-10-08 at 04:28:12 | Acceptable Use Policy | Data Protection Policy | Complaint Portal