Publications with the same journal as the Use of composite materials to renovate a steel water pipe publication

Zirconium oxide modified sulfonated poly(ether ether ketone) membranes for direct methanol fuel cell applications

Article in International Scientific Journal

V. Silva (Author) (Other); B. Ruffmann (Author) (Other); Silva, H (Author) (Other); Adélio Mendes (Author) (FEUP); Luís Madeira (Author) (FEUP); S. Nunes (Author) (Other)

2004

XRD, SEM and Petrologic Characterization of a L4-L5 Ordinary Chondrite Meteorite

T. M. Seixas (Author) (FCUP); B. Almeida (Author) (Other); M. H. Mendes (Author) (Other); M. A. Salgueiro da Silva (Author) (FCUP); J. F. Santos (Author) (Other); F. Almeida (Author) (Other); Z. Diogo (Author) (Other); A. B. Lopes (Author) (Other); J. M. Vieira (Author) (Other)

2013

Wear resistance of powder hard metal inserted ductile iron

Nuno Lourenço (Author) (FEUP); Henrique Santos (Author) (FEUP)

2006

Visco-elastic-plastic properties of suture fibers made of PLA-PCL

A.C. Vieira (Author) (Other); R. Medeiros (Author) (Other); R. M. Guedes (Author) (FEUP); A. T. Marques (Author) (FEUP); V. Tita (Author) (Other)

2012

Use of composite materials to renovate a steel water pipe

M. Sousa (Author) (Other); C. Novo (Author) (Other); A. N. Costa (Author) (Other); António Torres Marques (Author) (FEUP); J. Justo (Author) (Other)

2004

Use of acoustic energy in the processing of molten aluminium alloys

Carlos Silva Ribeiro (Author) (FEUP); Hélder Puga (Author) (Other); Joaquim Barbosa (Author) (Other); Ana Maria Pinto (Author) (Other)

2012

Tungsten carbide powder inserts in ductile iron

Liliana Duarte (Author) (FEUP); Nuno Lourenço (Author) (FEUP); Henrique Santos (Author) (FEUP); Joaquim Santos (Author) (Other); Carlos Sá (Author) (FEUP)

2004

Tungsten carbide powder inserts in ductile iron

L. Duarte (Author) (Other); N. Lourenco (Author) (Other); H. Santos (Author) (Other); J. Santos (Author) (Other); Carlos Sá (Author) (FEUP)

2004

Thermoelectric power of Gd4(Co-A)3 compounds (A = Cu, Pt)

T. M. Seixas (Author) (FCUP); Manuel Silva (Author) (FCUP); H. F. Braun (Author) (Other); G. Eska (Author) (Other)

2013

The use of sodium silicate to improve wetting of tungsten carbide powder with ductile iron

Nuno Lourenço (Author) (FEUP); Henrique Santos (Author) (FEUP); Carlos Sá (Author) (FEUP)

2008

The Signal Characteristics of the Spectral Response of Bragg Grating Sensor Embedded in Composite Laminated after the Cure Process

CA Ramos (Author) (Other); O Frazão (Author) (Other); I Dias (Author) (Other); António Torres Marques (Author) (FEUP)

2006

The influence of the processing temperature on the microstructure of y-TiAl joints brazed with a Ti-15Cu-15Ni alloy

A. Guedes (Author) (Other); A. Pinto (Author) (Other); Manuel Fernando Gonçalves Vieira (Author) (FEUP); Filomena Maria da Conceição Viana (Author) (FEUP)

2003

The Influence of NaBH4 in Performance of the Proton Exchange Polymer Fuel Cell

L. Martins (Author) (Other); Maria Cristina Nunes (Author) (FEUP); M. C. Pinto (Author) (Other); J.I. Martins (Author) (FEUP); Mohammed Bazzaoui (Author) (FEUP)

2004

The influence of flame retardant agents in the fire performance of SMC

João Alcino Rodrigues (Author) (Other); António Torres Marques (Adapter) (FEUP)

2004

The influence of flame retardant agents in the fire performance of SMC

J. A. Rodrigues (Author) (Other); António Torres Marques (Author) (FEUP)

2004

The Effect of the Carbon Epoxy Plate’s Size under Low Velocity Impact

Ana Amaro (Author) (Other); Paulo Reis (Author) (Other); Marcelo Francisco Moura (Author) (FEUP)

2008

Strength Prediction of Adhesively-Bonded Scarf Repairs in Composite Structures under Bending

R. D. S. G. Campilho (Author) (Other); M. F. S. F de Moura (Author) (FEUP); A. M. G. Pinto (Author) (Other); D. A. Ramantani (Author) (Other); J. J. L. Morais (Author) (Other); J. J. M. S. Domingues (Author) (Other)

2010

Strength Prediction and Experimental Validation of Adhesive Joints Including Polyethylene, Carbon-Epoxy and Aluminium Adherents

Arnaldo Manuel Guedes Pinto (Author) (FEUP); A. G. Magalhães (Author) (FEUP); Raul Campilho (Author) (FEUP); M. F. S. F. de Moura (Author) (FEUP); A. Monteiro Baptista (Author) (FEUP)

2010

Stereolitography, the front edge of rapid prototyping

F. Jorge Lino (Author) (FEUP); Pedro V. Vasconcelos (Author) (Other); Rui J. L. Neto (Author) (FEUP); Ricardo Paiva (Author) (Other)

2008