Saltar para:
Logótipo
Comuta visibilidade da coluna esquerda
Você está em: Início > Publicações > Visualização > Modified carbide-derived carbons used in the catalytic wet peroxide oxidation of oily wastewaters

Modified carbide-derived carbons used in the catalytic wet peroxide oxidation of oily wastewaters

Título
Modified carbide-derived carbons used in the catalytic wet peroxide oxidation of oily wastewaters
Tipo
Artigo em Livro de Atas de Conferência Internacional
Ano
2018
Autores
Díaz de Tuesta, Jose Luis
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Munoz, Macarena
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Domínguez, Carmen M.
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Casas, Jose A.
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Gläsel, Jan
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Etzold, Bernard
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Faria, Joaquim
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Gomes, Helder
(Autor)
Outra
A pessoa não pertence à instituição. A pessoa não pertence à instituição. A pessoa não pertence à instituição. Sem AUTHENTICUS Sem ORCID
Outras Informações
ID Authenticus: P-011-1YM
Abstract (EN): Modified carbide-derived carbon (CDC) materials, prepared from TiC, were tested as catalysts in the decomposition of H2O2 and in the catalytic wet peroxide oxidation (CWPO) of 4-nitrophenol (4-NP), either in aqueous phase or in biphasic medium. The reactive extraction of Ti from the metal carbide (2 ¿m) was carried out to prepare the CDC materials, as described elsewhere [1]. Briefly, 0.03 m s¿1 Cl2 gas was used (1.5 mol m¿3 in He) as extraction agent during 5 h at 800, 1000 and 1200 ºC. Afterwards, H2 was used for 0.5 h at the extraction temperature to remove residual chlorine, resulting in CDC-800, CDC-1000 and CDC-1200 materials, respectively. Additionally, CDC-800 was treated with a mixture of 98% H2SO4 and 30% w/v H2O2 (3:1) at room temperature for 3 h by two methods: (1) wetting the material in the oxidative solution and (2) oxidizing the material partially encapsulated with WAX paraffin, resulting in CDC-800-Ox and CDC-800-Wax, respectively. Firstly, the materials were tested in the decomposition of H2O2 and, then, in the adsorption and CWPO of 4-NP, adapting the experimental procedure described in previous works [2-3] at the following operating conditions: 25-50 ºC, pH0 = 3.0, and concentrations of solid material, 4-NP and H2O2 of 2.5 g/L, 5.0 g/L and 17.8 g/L, respectively. Cyclohexane, c-C6 (O/W volume ratio = 1:5) was used to simulate oily wastewater and study the influence of the oil phase presence in the medium.
Idioma: Inglês
Tipo (Avaliação Docente): Científica
Documentos
Não foi encontrado nenhum documento associado à publicação.
Recomendar Página Voltar ao Topo
Copyright 1996-2025 © Centro de Desporto da Universidade do Porto I Termos e Condições I Acessibilidade I Índice A-Z
Página gerada em: 2025-12-14 às 19:30:47 | Política de Privacidade | Política de Proteção de Dados Pessoais | Denúncias | Livro Amarelo Eletrónico